Recommendations for gunsmiths in/around Clackamas county

Discussion in 'General Firearm Discussion' started by RifleEnthusiast, Jan 9, 2016.

  1. RifleEnthusiast

    RifleEnthusiast
    Close to Oregon City
    Active Member

    Messages:
    334
    Likes Received:
    56
    I'm looking for recommendations for gunsmiths to work on CZ and Sig Sauer handguns, barrel fitting, minor part replacements kind of work.
     
  2. RifleEnthusiast

    RifleEnthusiast
    Close to Oregon City
    Active Member

    Messages:
    334
    Likes Received:
    56
    Bump! Anyone..? :)
     
  3. STUKA

    STUKA
    Close to Milwaukie
    I'm not a gynecologist,but I'll have a look. Bronze Supporter 2016 Volunteer 2017 Volunteer

    Messages:
    682
    Likes Received:
    1,309
    Velzey in estacada is highly regarded.
    Don't know if he works on that stuff, but might be worth a try.
    He's a member here
     
  4. U201491

    U201491 Well-Known Member

    Messages:
    9,857
    Likes Received:
    10,569
    Rich's Guns in Donald Oregon is good. I know Lee and used to work with his Dad.
    He runs a good clean shop.
     
  5. RifleEnthusiast

    RifleEnthusiast
    Close to Oregon City
    Active Member

    Messages:
    334
    Likes Received:
    56
    It seems like Rich's has quite the good reputation, thank you :)
    I'll call them and see if they do the types of jobs I'm looking for.
     
  6. billcoe

    billcoe
    PDX
    Platinum Supporter Platinum Supporter

    Messages:
    808
    Likes Received:
    484
    Like to see how it goes for you, I have a Sig that needs some work.
     
  7. etrain16

    etrain16
    Oregon
    Bronze Supporter Bronze Supporter

    Messages:
    10,146
    Likes Received:
    26,896
    Second recommendation for NWFA member @Velzey. He's out of Estacada. You might send him a PM and ask about your repairs.
     
  8. Velzey

    Velzey
    Gunsmith
    Büchsenmacher Bronze Vendor Bronze Supporter

    Messages:
    2,726
    Likes Received:
    4,958
    :eek: how did I miss this!!

    Who has time to clean a shop with so many guns to fix!!

    But anyway Sig, CZ's no problem! I handle them all...
     
    etrain16 likes this.
  9. PaulB47

    PaulB47
    Hillsboro
    Well-Known Member

    Messages:
    2,189
    Likes Received:
    3,221
    Grant Cunningham is the best, but I think he only works on Dan Wessons. Might have expanded though. Great guy to work with!
     
  10. Stomper

    Stomper
    Ungovernable!
    Become Ungovernable! Gold Supporter

    Messages:
    14,320
    Likes Received:
    25,203
    Another vote for Velzey! He did a STELLAR job cutting down and threading an 16" AR15 barrel for me that was on a complete upper. He dismantled it, machined it down, then reassemble it.

    You'd never know it didn't come from the factory as an 11.5" specimen. I have already run several hundred rounds through it, and it functions FLAWLESSLY.

    I'm going to hire him to restore and parkerize a bubba-ized 1911A1 back to USGI configuration in a couple more weeks from now!

    :D
     
    etrain16 likes this.
  11. Velzey

    Velzey
    Gunsmith
    Büchsenmacher Bronze Vendor Bronze Supporter

    Messages:
    2,726
    Likes Received:
    4,958
    I know my way around Dan Wesson's, and I'm one of the few around here that can retime your Colt Python!

    I also know my way around Cummins diesels! o_O But I don't like smelling like stove oil anymore!:)


    :s0055:
     
    sixfoot674, Stomper and Certaindeaf like this.

Share This Page