Quantcast
  1. Sign up now and join over 35,000 northwest gun owners. It's quick, easy, and 100% free!

*RARE* NEW MEGA MACHINE Stripped lowers+uppers in FDE - cons serial #s!!!

Discussion in 'Part & Accessory Classifieds' started by Burn'Nsensation, Dec 5, 2010.

  1. Burn'Nsensation

    Burn'Nsensation PDX Member

    Messages:
    37
    Likes Received:
    0
    Perfect condition and never built on. Asking $500 for both...Let me know if you are interested or have any questions. Thanks!
     
  2. Krinkov

    Krinkov NW OREGON Member

    Messages:
    246
    Likes Received:
    21
    Im not an AR guy, exactly how are these rare? perhaps, how many were made? is the FDE why they're rare?

    and this is for just the two stripped lowers?
     
  3. Burn'Nsensation

    Burn'Nsensation PDX Member

    Messages:
    37
    Likes Received:
    0
    yes...these were a very limited run in FDE and Olive drab...and I believe only offered to JC Weaponry. The finish is from the same factory which anodizes Leupold/Trijicon/EOtech's FDE...you can Google them and see how limited the run was...
     
  4. PhysicsGuy

    PhysicsGuy Corvallis, OR Resident Science Nut

    Messages:
    4,132
    Likes Received:
    155
    Do they come with the stripped uppers pictured?
     
  5. Burn'Nsensation

    Burn'Nsensation PDX Member

    Messages:
    37
    Likes Received:
    0
    yes...both upper and lower *I will revise. Thanks!
     
  6. cyclesarge

    cyclesarge Eugene OR, DUH! We're ALL in the NORTHWEST Well-Known Member

    Messages:
    1,367
    Likes Received:
    77
    Guaranteed way to get you thread "crapped", list "parts" in the "rifle and shotgun" section.:laugh:
     
  7. PhysicsGuy

    PhysicsGuy Corvallis, OR Resident Science Nut

    Messages:
    4,132
    Likes Received:
    155

    Moved
     
  8. SVT-ROY

    SVT-ROY Tigard Resident Beretta guru

    Messages:
    853
    Likes Received:
    173
    Question..they have not been built on, does that mean they could be built into a "pistol" ?
     
  9. Burn'Nsensation

    Burn'Nsensation PDX Member

    Messages:
    37
    Likes Received:
    0
    no they have not been built on yet and yes you can build it into a pistol since it's stamped Multi-Caliber
     
  10. freeagent

    freeagent The Gorge, WA Member

    Messages:
    47
    Likes Received:
    0
    Do so at your own risk. if they weren't logged as pistol lowers by the manufacturer, then they're rifle lowers... read the law.
     
  11. Unka-Boo

    Unka-Boo Milwaukie Active Member

    Messages:
    923
    Likes Received:
    225
    You can build a pistol off a stripped lower if it was transferred as a "receiver". Which it should have been. If it hasn't been built into anything, it is neither pistol or rifle.
     
  12. freeagent

    freeagent The Gorge, WA Member

    Messages:
    47
    Likes Received:
    0
    Yeah, and you'd probably be OK providing the BATF wasn't willing to split hairs in court, or wasn't pissed off at you for something else.

    The only safe way to build a "defensible" pistol is to start with a lower stamped "pistol", that has never been built as a rifle.

    Read the law. if you don't have a lot of experience with that sort of thing get someone who does to interpret it for you before dispensing legal advice

    I don't mean to preach, but this a commonly misread reg that mostly is loosely enforced, but............
     
  13. Unka-Boo

    Unka-Boo Milwaukie Active Member

    Messages:
    923
    Likes Received:
    225
    One little word engraved on the side is not a defense, photographic documentation of your build can be.
     
  14. Trlsmn

    Trlsmn In Utero (Portland) Well-Known Member

    Messages:
    6,838
    Likes Received:
    1,186
    That's not true, do 1911's say pistol on the side?

    The Form 4473 has had an option for "Receiver" for some time now so these lowers are neither Pistol nor Rifle.

    As for the "commonly misread reg that mostly is loosely enforced" please post it and we can all see.
     
  15. Burn'Nsensation

    Burn'Nsensation PDX Member

    Messages:
    37
    Likes Received:
    0
    Yes, when this was transfered, it was literally called in as a "receiver" and when my FFL referenced to the person on the other end (the state) it was logged as "multicaliber" (never referenced as 5.56, 6.8, .22,9mm...etc). So not to point fingers but someone here is wrong in a sense. But as it stands currently (unbuilt) it's neither a pistol or rifle...it's a paper weight for all I'm concerned, until its fully built and called in to register its final caliber. Say what you say but I'm not holding anyones hands in court nor I doubt that the Feds will invest that much time and financial resources to split hairs on this...unless as stated prior, they had more mounting evidence to build a case on...but all in all, I'm not trying to turn this post into a discussion, I'm just trying to sell the receivers to whom ever plans on doing the resource on their own....
     
  16. cyclesarge

    cyclesarge Eugene OR, DUH! We're ALL in the NORTHWEST Well-Known Member

    Messages:
    1,367
    Likes Received:
    77
    FWIW, the caliber (or Multicaliber) doesn't have anything to do with wether it's a rifle, pistol or bare receiver. Not trying to turn your thread into a discussion (anymore than it is already, anyway) but thought this might be useful info to a potential buyer.:thumbup:
     
  17. freeagent

    freeagent The Gorge, WA Member

    Messages:
    47
    Likes Received:
    0
    Oh, yeah. Take your YouTube video right into court with you. That'll prove at at a minimum you were ignorant of the law, and we all know how well that holds up...
     
  18. SVT-ROY

    SVT-ROY Tigard Resident Beretta guru

    Messages:
    853
    Likes Received:
    173
    Now I'm totally lost lol. After a build I would have to call it in and pay the state?
     
  19. Belial

    Belial Vancouver, WA Active Member

    Messages:
    118
    Likes Received:
    46
    Care to enlighten us on the "Law" your are talking about??

    "Read the Law." that is special...:rollingeyes:
     
  20. Unka-Boo

    Unka-Boo Milwaukie Active Member

    Messages:
    923
    Likes Received:
    225
    Show me this law you keep speaking of.

    ETA:

    Why don't we move this out of the sale ad, my apologies to the seller!
     
Thread Status:
Not open for further replies.