- Messages
- 12
- Reactions
- 12
- Ad Type
- For Sale
- Price
- $100
- Manufacturer
- Palmetto State Armory
- City
- Beaverton
- State
- Oregon
- Zip Code
- 97008
I replaced my barrel and handrail to make it 16" so it's not a Short Barrel Rifle (SBR).
I purchased this barrel and handrail from Palmetto State Armory as part of a complete upper receiver. I sent it to a gunsmith to pin and weld a muzzle device in order to extend it to 16", but he drilled clean through the threads. He assured me the barrel is safe and functional, but should not have a pin welded in case it protruded into the barrel, causing an obstruction to rounds going through.
I suggest only purchasing this if you plan on keeping this barrel 10.5". If you do ever pin and weld a muzzle device to extend the barrel length, make sure it's done by a professional and they can assure you the pin does not protrude into the barrel.
The following info is directly from the PSA website for this product found here https://palmettostatearmory.com/psa...-slanted-m-lok-railed-upper-with-bcg-ch4.html
Barrel Length: 10.5"
Barrel Profile: A2 Style
Barrel Steel: Chrome Moly Vanadium
Barrel Finish: Nitride
Chrome Lining: No
Muzzle Thread: 1/2-28
Chamber: 9mm (9x19)
Twist Rate: 1 in 10"
Barrel Extension: 9mm
Handguard Type: PSA 12" Slant Lightweight M-Lok Rail
Barrel: 10.5" chrome moly steel barrel. Chambered in 9mm, (9x19), with a 1/10 twist. The barrel is nitride treated for durability and finished off with a Palmetto State Armory 12" Slanted Lightweight M-lok free-float rail.
I purchased this barrel and handrail from Palmetto State Armory as part of a complete upper receiver. I sent it to a gunsmith to pin and weld a muzzle device in order to extend it to 16", but he drilled clean through the threads. He assured me the barrel is safe and functional, but should not have a pin welded in case it protruded into the barrel, causing an obstruction to rounds going through.
I suggest only purchasing this if you plan on keeping this barrel 10.5". If you do ever pin and weld a muzzle device to extend the barrel length, make sure it's done by a professional and they can assure you the pin does not protrude into the barrel.
The following info is directly from the PSA website for this product found here https://palmettostatearmory.com/psa...-slanted-m-lok-railed-upper-with-bcg-ch4.html
Barrel Length: 10.5"
Barrel Profile: A2 Style
Barrel Steel: Chrome Moly Vanadium
Barrel Finish: Nitride
Chrome Lining: No
Muzzle Thread: 1/2-28
Chamber: 9mm (9x19)
Twist Rate: 1 in 10"
Barrel Extension: 9mm
Handguard Type: PSA 12" Slant Lightweight M-Lok Rail
Barrel: 10.5" chrome moly steel barrel. Chambered in 9mm, (9x19), with a 1/10 twist. The barrel is nitride treated for durability and finished off with a Palmetto State Armory 12" Slanted Lightweight M-lok free-float rail.
- I agree to the classified rules and terms of service