- Ad Type
- For Sale
- Price
- $1100
- Manufacturer
- Other / Not Listed
- Caliber
- 7.62x51mm
- City
- Oregon City
- State
- Oregon
PLEASE NOTE I have currently have a A3 stock that does not have the glued pad. It is also listed unless it sales first it is available in place of the stock pictured.
$1100 with an A2 stock or
$1250with the Pictured A3 retractable stock.
If you need ammo I will sell 200 rds with this for $100
I have owned this for around 12 years and it does not get any use after building a couple cetmes its a Indep G3 note it is Marked "G3" Not ptr or some other clone marking. The barrel is Portuguese FMP Marked I can't say for sure but from what I have gathered and based on the quality of the welds this rifle minus the German and US drop in parts that I added was made in Portugal.
This is a Semi Auto G3 Battle Rifle. Since I did not know if this was a pre-ban I added confirmed US made parts to ensure 922r compliance so it has a PTR Navy Lower with US Parts and it has a extend US made Charging handle and flash hider
The internals was replaced with German factory HK Parts just because I had them the bolt is new old stock German locking pc the bolt gap is perfect and the charging lever is as easy to pull as they can be. Just test fired 30 rds to make sure it operated smoothly.
It has an A3 retractable stock the butt pad in the photo was jb welded on and is quite comfortable vs. not having the pad. I know Purest would prefer not to have the pad but if you plan to shoot it It does make it comfortable.
The photos picked up some surface rust which has been cleaned off it was not even visible until the flash and the way the photo processed showed it.
$1100 with an A2 stock or
$1250with the Pictured A3 retractable stock.
If you need ammo I will sell 200 rds with this for $100
I have owned this for around 12 years and it does not get any use after building a couple cetmes its a Indep G3 note it is Marked "G3" Not ptr or some other clone marking. The barrel is Portuguese FMP Marked I can't say for sure but from what I have gathered and based on the quality of the welds this rifle minus the German and US drop in parts that I added was made in Portugal.
This is a Semi Auto G3 Battle Rifle. Since I did not know if this was a pre-ban I added confirmed US made parts to ensure 922r compliance so it has a PTR Navy Lower with US Parts and it has a extend US made Charging handle and flash hider
The internals was replaced with German factory HK Parts just because I had them the bolt is new old stock German locking pc the bolt gap is perfect and the charging lever is as easy to pull as they can be. Just test fired 30 rds to make sure it operated smoothly.
It has an A3 retractable stock the butt pad in the photo was jb welded on and is quite comfortable vs. not having the pad. I know Purest would prefer not to have the pad but if you plan to shoot it It does make it comfortable.
The photos picked up some surface rust which has been cleaned off it was not even visible until the flash and the way the photo processed showed it.
- I agree to the classified rules and terms of service
Last Edited: