Pay it forward thread

[Caveman Jim]

I've got a bit of 2A signage and handheld signs that I will donate to the cause if anyone is inclined to pick up the torch that I'm passing along. FREE

Ammunition or components storage containers. These are what I used before I went to all ammo cans. FREE

A bunch of empty 1# powder canisters and empty primer trays. FREE

Located in Elma, Wa or I can bring with to PDX when I head back to Florida in a month or two.

View attachment 2027156 View attachment 2027157 View attachment 2027158 View attachment 2027159 View attachment 2027160

It's all going to the dump or burned after we return home March 20th…

 

[Bobbygun]

Older Cabela's B1-12 Vibratory Case Tumbler. This is headed for the dump if nobody wants it. I cleaned some brass with it yesterday and it still works, but there was a chunk of plastic on the floor where it was sitting. Upon further inspection it looks like the plastic part at the top of one of the springs below the upper bowl broke off. The spring still seems to sit where it's supposed to, but the tumbler is louder than normal. It could use a little cleaning up as well. Might be useful for parts for someone who already has this model, or someone handier than me (most people) might be ablet to fix it, or use it as is. I thought about using it up in my shop where I wouldn't have to listen to it. I've decided to use my Cabela's Club points to order a new tumbler, so I won't need this one. I can meet up in Lowell at the Post Office most days and make it into Springfield/Thurston now and then as well.

View attachment 2028600

Tumbler is now spoken for.

 

[Richo877]

Anyone want some half inch heavy boards?
They were taken down from heavy duty stockroom shelving. I planned on chopping them down and building a shelf or something, but my ambitions are greater than my means. These have just been taking up my backseat for a month and I'm gonna end up scrapping them unless someone else can use them.

Pickup in Wilsonville*

 

[bionic knees]

I have about 18 issues of Shooting Illustrated for anybody that wants them. this month back.


F.C.F.S.

 

[1911Fanatic]

Galco holster for HK USP COMPACT 9/40/45 and 2000

 

[1911Fanatic]

Galco holster for HK USP COMPACT 9/40/45 and 2000

Holster has been spoken for.

 

[CES07]

**GONE**

I have for the taking (15) boxes of 270 reloads (for components only), some Speer/Sierra bullets and a few sleeves of primers should anyone want them. At least (3) of these boxes are likely factory loaded ammunition, but they were in a box of clearly marked reloaded ammunition and not marked as such, so I am considering them as reloads..

FTF in SW Portland/Tigard/Beaverton area.

DM with any questions.

 

[Cogs]

I have for the taking (15) boxes of 270 reloads (for components only), some Speer/Sierra bullets and a few sleeves of primers should anyone want them. At least (3) of these boxes are likely factory loaded ammunition, but they were in a box of clearly marked reloaded ammunition and not marked as such, so I am considering them as reloads..

FTF in SW Portland/Tigard/Beaverton area.

DM with any questions.
View attachment 2074745

I have a 270 and dies for it, but not many rounds or empty casings to reload. I'm all over your area M-W. Would love to be considered.
Bill

 

[CES07]

Bill, they are yours, I'll slide you some extra stuff too that you will enjoy. You're a great member of this community and I appreciate all that TNL does for recreational target shooters and the clean ups TNL has orchestrated for years.

DM sent.

 

[Cogs]

Bill, they are yours, I'll slide you some extra stuff too that you will enjoy. You're a great member of this community and I appreciate all that TNL does for recreational target shooters and the clean ups TNL has orchestrated for years.

DM sent.

Thank you, Sir! Very nice! Message sent.

 

[kmk1012]

Couldn't have gone to a better member!!!!

 

[GI JEW 555]

** Brass has been spoken for**

Priority is moving right now so not going to have a chance to clean and reload this.

All brass shot from factory ammo and put back in the box

About 43 pieces of 300 wm brass. REM/Win
11lbs of 556/223- Fed, LC, PMC
75 pieces of 6.5 creed S&B
A box of 30-30 brass Win

Any other time I would be fine to ship just don't have the time to drop it in the mail right now. Hoping someone in WA can use it.

 

[cd90caprice]

Shotgun case/sleeve up for grabs. A little dusty from sitting around the shop. I'm never going to use it. It's currently in Sellwood, you can pick up there or I can meet on the way back to Estacada M-F or in Estacada on the weekends. Send a PM if you would like to grab it.

SPOKEN FOR

 

[EMHDAD]

Confusing thread.

 

[nwwoodsman]

Confusing thread.

Purple monkey dishwasher?

 

[Knobgoblin]

** Brass has been spoken for**

Priority is moving right now so not going to have a chance to clean and reload this.

All brass shot from factory ammo and put back in the box

About 43 pieces of 300 wm brass. REM/Win
11lbs of 556/223- Fed, LC, PMC
75 pieces of 6.5 creed S&B
A box of 30-30 brass Win

Any other time I would be fine to ship just don't have the time to drop it in the mail right now. Hoping someone in WA can use it.

View attachment 2077230

Pm

 

[Rem700..300]

Various powders, all less than 1/2 full. Recieved these in a garage cleanout so don't know the full history. Been on my reloading bench for a year. A couple .22 scope rings and a reloading book.
Must pick up in Albany.
Thank you

 

[gunsmith007]

I will take them

 

[mikeypdx48]

Let's see if we can get a warm, fuzzy thread going:

I have to give (shipping included to Pacific NW):

BNIB Blackhawk Serpa holster CQC for Sig P228/229 with belt and paddle option

It goes to first "I'll take it." PM me your mailing address.

**GONE**

There will always be grifters, thats the issue

 

[Edmon]

Porch pickup Battle Ground, Wa. 3 small styrofoam coolers with 3 reusable ice packs for each one. Inside dimensions 7 3/4"long 6" wide 7" deep.