Bronze Supporter
- Messages
- 2,040
- Reactions
- 3,372
I have one like this. Not a bad investment for the price. Better than nothing!On checking my tools turns out I don't have a torque wrench that goes down low enough to mount the scope (10-30 in/lbs)...and neither does my Brother-in-law.
Titan 23140 0-80 in/lb & 0-7 Newton-Meter 1/4 Drive Beam Style Torque Wrench 802090231407 | eBay
The torque beam must float above the scale and not touch the scale at any point. If needed, the torque beam can be repositioned by gently bending back into place. Before attaching torque wrench, hand tighten fasteners until snug.
www.ebay.com