Quantcast
  1. Sign up now and join over 35,000 northwest gun owners. It's quick, easy, and 100% free!

Mill

Discussion in 'Non-Firearm Item Classifieds' started by cyclesurvival, Aug 30, 2009.

  1. cyclesurvival

    cyclesurvival Vancouver Well-Known Member

    Messages:
    1,090
    Likes Received:
    52
    So I bought this mill and then found another machine, I cleaned the heck out of it and it comes with a chuck and collets. will trade for 223 or 308 rifle. Value is $500 so trades either up or down with cash. my picture file is full so e-mail for more photos. Im thinking that the motor is 3 phase but not 100% shure but easy enough to change

    Item Milling/Drilling Machine
    Swing (In.) 16
    Motor HP 2
    Phase 3?
    Spindle R8 and comes with some collets and drill chuck
    Spindle Taper J3
    Spindle Speeds (12) 120 to 2500 RPM
    Spindle Travel (In.) 5 In
    Spindle to Table (In.) 18
    Column Dia. (In.) 4 1/2
    Quill Dia. (In.) 3
    Head Milling, Swivels 360 Degrees and Travels Vertically by Rack and Pinion
    Table Work Surface (In.) 31 7/8 x 9 3/8
    Table Surface Height (In.) 10 1/2
    T-Slots (4) 5/8 In
    Graduations (In.) 0.001
    Capacity Drill 1 1/4 In, Face Mill 3 In, End Mill 3/4 In
    Features Dovetail Ways With Adjustable Gibs, Adjustable Depth Stop
    Operation Table Rotates 0.100 In For Every Turn of Handwheel, Maximum X-Axis Travel is 19 3/4 In, Maximum Y-Axis Travel is
     
    Last edited: Aug 30, 2009
  2. Keane

    Keane Hillsboro, OR Active Member

    Messages:
    734
    Likes Received:
    52
    Do you have any more pictures/information on the mill? I know of 1 or 2 people who would be interested in it depending on the details.
     
  3. cyclesurvival

    cyclesurvival Vancouver Well-Known Member

    Messages:
    1,090
    Likes Received:
    52
    posted some specs and pictures
     
  4. cyclesurvival

    cyclesurvival Vancouver Well-Known Member

    Messages:
    1,090
    Likes Received:
    52
    still got it any intrest.
     
Thread Status:
Not open for further replies.