- Messages
- 1,084
- Reactions
- 59
So I bought this mill and then found another machine, I cleaned the heck out of it and it comes with a chuck and collets. will trade for 223 or 308 rifle. Value is $500 so trades either up or down with cash. my picture file is full so e-mail for more photos. Im thinking that the motor is 3 phase but not 100% shure but easy enough to change
Item Milling/Drilling Machine
Swing (In.) 16
Motor HP 2
Phase 3?
Spindle R8 and comes with some collets and drill chuck
Spindle Taper J3
Spindle Speeds (12) 120 to 2500 RPM
Spindle Travel (In.) 5 In
Spindle to Table (In.) 18
Column Dia. (In.) 4 1/2
Quill Dia. (In.) 3
Head Milling, Swivels 360 Degrees and Travels Vertically by Rack and Pinion
Table Work Surface (In.) 31 7/8 x 9 3/8
Table Surface Height (In.) 10 1/2
T-Slots (4) 5/8 In
Graduations (In.) 0.001
Capacity Drill 1 1/4 In, Face Mill 3 In, End Mill 3/4 In
Features Dovetail Ways With Adjustable Gibs, Adjustable Depth Stop
Operation Table Rotates 0.100 In For Every Turn of Handwheel, Maximum X-Axis Travel is 19 3/4 In, Maximum Y-Axis Travel is
Item Milling/Drilling Machine
Swing (In.) 16
Motor HP 2
Phase 3?
Spindle R8 and comes with some collets and drill chuck
Spindle Taper J3
Spindle Speeds (12) 120 to 2500 RPM
Spindle Travel (In.) 5 In
Spindle to Table (In.) 18
Column Dia. (In.) 4 1/2
Quill Dia. (In.) 3
Head Milling, Swivels 360 Degrees and Travels Vertically by Rack and Pinion
Table Work Surface (In.) 31 7/8 x 9 3/8
Table Surface Height (In.) 10 1/2
T-Slots (4) 5/8 In
Graduations (In.) 0.001
Capacity Drill 1 1/4 In, Face Mill 3 In, End Mill 3/4 In
Features Dovetail Ways With Adjustable Gibs, Adjustable Depth Stop
Operation Table Rotates 0.100 In For Every Turn of Handwheel, Maximum X-Axis Travel is 19 3/4 In, Maximum Y-Axis Travel is
Last Edited:
