Looking for a sig expert?

Discussion in 'Handgun Discussion' started by Glass, Jan 4, 2015.

  1. Glass

    Glass
    Oregon city
    Member

    Messages:
    64
    Likes Received:
    5
    Good morning does any body know of a good sig expert here in Portland?
    The issue I'm having is with my 229 has high round count won't always fire.
    Looks like soft firing pin hits.
    But if you do the pencil test it throws it out of the barrel.
    Thanks
     
  2. Bill Siegle

    Bill Siegle
    Oregon
    Active Member

    Messages:
    501
    Likes Received:
    202
    Contact JC Weaponry.
     
  3. Barachiah

    Barachiah
    Eastern Oregon at last
    Active Member

    Messages:
    383
    Likes Received:
    95
    Probably could stand to re-spring the pistol. Sounds like either a weak main spring or maybe hard primers? Are you shooting reloads?
     
    hker71 and jbett98 like this.
  4. SynapticSilence

    SynapticSilence
    Battle Ground, WA
    Well-Known Member

    Messages:
    758
    Likes Received:
    435
    Just a suggestion if you haven't thought of it. Try cleaning out the firing pin channel. If it's high mileage, you could easily get enough crud built up there to impede the pin from fully impacting the primer.
     
    AngryRedTicTac and Barachiah like this.
  5. PORSCHE928S4

    PORSCHE928S4
    Newport, Oregon
    Active Member

    Messages:
    411
    Likes Received:
    147
    Replace the mainspring cheap fix and +1 on the deep cleaning .
     

Share This Page