- Ad Type
- For Sale
- Manufacturer
- Other / Not Listed
- City
- Oregon City
- State
- Oregon
Please note as noted I am listing these as junk or scrap some parts are usable some are not.
Minimum $15 purchase for a face to face sale. Sorry as much as I enjoy BSing with some of you guys I can't take 20min out of a day to sell a $1 dollar part.
Shipping is available but it's $15 no matter how little or much you buy cause I want this gone. Some parts are gone so if it is not listed or has a line through it it's gone.
Dummy upper DO NOT SHOOT THIS! headspace is bad. the gas block is blocked, and the treaded part of the receiver is cracked and missing a chunk. good for a wall hanger comes with delta ring assembly and unshielded 6 hole non-colt handguards. $90
5.45x39 Barrel damaged by several attempts and removal of really bad stuck case. Edges of the chamber were damaged trying to remove it. The barrel extension edges were damaged trying to remove it using a hammer. the mouth of the chamber has some deep scratches. $30
Bushmaster rattled can stock $15 (SOLD)
Grip rattle canned $2 (SOLD)
Carbine skinny handguards Rattle canned $20
Damaged pistol buffer tube $10
Painted accessory mount that attached to the barrel $.50 (SOLD)
The painted trigger guard $.50 (SOLD)
Postban stock body $3 (SOLD)
Everything below is sold
Stripped FSB fits Skinny .625 Barrels one of the taper pin holes is oversize $10
Weapon Light with quick disco light does not work. $1Sold
G3 stock has some cosmetic flaws $5 Sold
Utg rail panel $1
Scope caps $.50
UTG HK scope mount rail $1
4 cetme or G3 grips for Metal grip frame $1 each SOLD
Unfinished Ar trigger $1 Sold
some metal thingy I don't from rifle I don't know what it is $1
Delta ring with finish ware $1 Sold
Old colt? ejection port cover missing parts $.25
set of rings missing screws to one $.50 Sold
Safety lever may not be finished $.50 Sold
Rail that sets on flat top receiver $1 Sold
scrap rail cut off $.10Sold
Cracked barrel extension does not use this on a rifle unless its a demilled dummy display rifle never to be fired. $1 Sold
some kind of muzzle break that was pinned damaged during removal . $2 Sold
US Molle Tactical Assault Vest $5 Sold
2 PSL-54 magazines that I tried to weld together to make a 20 rd mag no internals except the rusty follower no floorplate $20 or $35 with springs, Floorplate, and follower.
Some kind of scope mount for HK 90 series rifles did not fit mine very well. $5
some magpul buttstock thingy with 1 broken tab $.50
A front sight base that fits skinny .625" barrels has one oversized hole drilled. $8
A British Steel mag I believe this is a pre-ban mag but its steel and was dented so it does not function correctly may can be reshaped $2TRADED
some weird rail panel $.50
A PPS-43 mag that I modified to work in an ar15 mag well for a 7.62x25 rifle has internals intact but will never work for a pps-43 again $5
1 side of a shiny A2 handguard set $2
Airsoft Mp5 stock very well made might work for a gsg??? $10
another rail panel $1
a bent carbine gas tube $2TRADED
part of a Mp5 gas tube with Handguard hanger $2
Some magpul grip panels $1
2 shaved gas FSB gas blocks $ 2 each (1 left)
Ak47 Rear gas block dented $.50 cents Sold
Ak47 Grip? $2
Part of an ambi ar15 safety $.50 cents Sold
Ak gas tube or part of $.50 cents Sold
SKS Oil Bottle $1
Minimum $15 purchase for a face to face sale. Sorry as much as I enjoy BSing with some of you guys I can't take 20min out of a day to sell a $1 dollar part.
Shipping is available but it's $15 no matter how little or much you buy cause I want this gone. Some parts are gone so if it is not listed or has a line through it it's gone.
Dummy upper DO NOT SHOOT THIS! headspace is bad. the gas block is blocked, and the treaded part of the receiver is cracked and missing a chunk. good for a wall hanger comes with delta ring assembly and unshielded 6 hole non-colt handguards. $90
5.45x39 Barrel damaged by several attempts and removal of really bad stuck case. Edges of the chamber were damaged trying to remove it. The barrel extension edges were damaged trying to remove it using a hammer. the mouth of the chamber has some deep scratches. $30
Bushmaster rattled can stock $15 (SOLD)
Grip rattle canned $2 (SOLD)
Carbine skinny handguards Rattle canned $20
Damaged pistol buffer tube $10
Painted accessory mount that attached to the barrel $.50 (SOLD)
The painted trigger guard $.50 (SOLD)
Postban stock body $3 (SOLD)
Everything below is sold
Weapon Light with quick disco light does not work. $1Sold
G3 stock has some cosmetic flaws $5 Sold
Utg rail panel $1
Scope caps $.50
UTG HK scope mount rail $1
4 cetme or G3 grips for Metal grip frame $1 each SOLD
Unfinished Ar trigger $1 Sold
some metal thingy I don't from rifle I don't know what it is $1
Delta ring with finish ware $1 Sold
Old colt? ejection port cover missing parts $.25
set of rings missing screws to one $.50 Sold
Safety lever may not be finished $.50 Sold
Rail that sets on flat top receiver $1 Sold
scrap rail cut off $.10Sold
Cracked barrel extension does not use this on a rifle unless its a demilled dummy display rifle never to be fired. $1 Sold
some kind of muzzle break that was pinned damaged during removal . $2 Sold
US Molle Tactical Assault Vest $5 Sold
2 PSL-54 magazines that I tried to weld together to make a 20 rd mag no internals except the rusty follower no floorplate $20 or $35 with springs, Floorplate, and follower.
Some kind of scope mount for HK 90 series rifles did not fit mine very well. $5
some magpul buttstock thingy with 1 broken tab $.50
A front sight base that fits skinny .625" barrels has one oversized hole drilled. $8
A British Steel mag I believe this is a pre-ban mag but its steel and was dented so it does not function correctly may can be reshaped $2TRADED
some weird rail panel $.50
A PPS-43 mag that I modified to work in an ar15 mag well for a 7.62x25 rifle has internals intact but will never work for a pps-43 again $5
1 side of a shiny A2 handguard set $2
Airsoft Mp5 stock very well made might work for a gsg??? $10
another rail panel $1
a bent carbine gas tube $2TRADED
part of a Mp5 gas tube with Handguard hanger $2
Some magpul grip panels $1
2 shaved gas FSB gas blocks $ 2 each (1 left)
Ak47 Rear gas block dented $.50 cents Sold
Ak47 Grip? $2
Part of an ambi ar15 safety $.50 cents Sold
Ak gas tube or part of $.50 cents Sold
SKS Oil Bottle $1
Last Edited:
