- Thread Starter
- #41
When I received the laser, and upon installation, the on/off activation (detent) spring was not working. I fiddled with it to the point where it broke at the bend. I contacted LM about the issue. The gentleman I spoke with said he would get a new spring on the way to me. Today I received a HUGE 10" x 12" envelope from LM. I laughed, because the take-down spring is about 3/4" long and 1/8" wide. When I opened the envelope, I thought it was empty! I pulled out a piece of paper with a small bag stapled to it, and it was the on/off take-down lever itself. Not the needed spring. I'll be contacting LM sometime tomorrow in hopes of getting the correct part.