Gold Supporter
Silver Supporter
Bronze Supporter
- Messages
- 1,101
- Reactions
- 2,081
When I first started my 20 Practical project I had around 400 pcs Frontier 5.56 once fired brass that I used for my conversion and load development. Once I decided I would stick with it, I found that finding Frontier brass was going to be a chore. Low and behold, after about 6 months of looking a company popped up on the radar advertising once fired Frontier 5.56 brass, cleaned with primers and crimps still intact. I received the brass within a week and overall is typical of fired 5.56 brass, neck dents and such. I got the brass from Northwest Iowa Brass (this is for information purposes only and is not "free advertising").