- Messages
- 1,021
- Reactions
- 1,429
- Ad Type
- For Sale
- For Trade
- Price
- $450
- Manufacturer
- Other / Not Listed
- Caliber
- 30-06 Springfield
- City
- Tualatin
- State
- Oregon
- Zip Code
- 97062
Good condition (as modified) Eddystone M1917 American Enfield sporter chambered in 30-06, manufactured in 1918 according to OldGuns.net. Minor scuffs and scrapes on stock, no cracks. Metal finish is worn with around 50% blueing remaining but appears to be original with no pitting or rust. Front sight replaced with simple blade, original rear sight is removed. Right side of stock is inlet and receiver is tapped for a peep sight, where I've installed Williams 5D-JEMS.
Functions beautifully and has a very nicely broken in trigger. At the risk of mild embarrassment, I'll share this 5 round group I shot with it just a couple days ago at 100 yards with '69 head stamped Greek HXP M2 ball (ignore the flyer, that was me):
I really do like it and am only selling because I recently picked up a non-sporterized action to rebuild into the original as-issued configuration.
Sale includes 5 stripper clips:
Trade interests:
Firearms
Functions beautifully and has a very nicely broken in trigger. At the risk of mild embarrassment, I'll share this 5 round group I shot with it just a couple days ago at 100 yards with '69 head stamped Greek HXP M2 ball (ignore the flyer, that was me):
I really do like it and am only selling because I recently picked up a non-sporterized action to rebuild into the original as-issued configuration.
Sale includes 5 stripper clips:
- 3x Swedish Mauser M96, a popular alternative to the USGI stripper clips for the M1903 and M1917 because they don't have the little tabs that break off with repeated use
- 2x original U.S. M1903/M1917
Trade interests:
Firearms
- Pre-Remington (2007) JM stamped Marlin lever rifle in 357 mag
- Beretta M9 (no A1/A3/A4), open to Tennessee built but prefer Italian or MD manufactured
- FN/Browning Hi Power and clones, excluding the recent FN re-release
- Dead Air Hub/Keymo Adapter (DA428)
- Ruger Mark IV lower
- 308 AR barrel, 16"
- 308 AR carbon fiber handguard, DPMS high rail pattern or no top rail,
- 450 bushmaster upper or upper parts
- Schmidt Teflon coated milspec AR trigger (also sold as BCM PNT, ALG QMS, Sionics EMS, PSA EPT, etc)
- M1917 rifle & Lee-Enfield No 4 Mk 1* parts, especially uncut stocks, forends, & handguards, pm for updated list
- Cajun Gun Works CZ 75 parts
- Floating trigger pin, TRPIN
- Short reset kit, SRS-2
- Reach reduction kit Type 2, RRK-T2, with black DLC Old-style trigger (75585)
- Aimpoint Acro P2
- Sig Romeo X Enclosed Pro
- Trijicon RCR or RMR HD
- Eotech or Aimpoint rifle sights
- Vortex or Primary Arms 3x prism in green
- Streamlight TLR-1 HL/HLX
- SureFire Dual Fuel rifle lights
- 30-40 Krag
- 300BO: S&B, any variety
- 45 ACP: S&B 230 grain FMJ
- 7.62x39: any non-corrosive brass case
- 7.62x51 M80 ball: S&B, IMI, Magtech, or CBC
- Primers of all types
- Carbide 4 die sets: 25 ACP, 380 ACP, 45 ACP, 9mm
- 3 die sets w/ full-length sizing: 223/5.56, 7.62x39, 300 BO, 30-40 Krag, 303 British, 308/7.62NATO, 30-06, 7.62x54R, 450 Bushmaster
- Shell holders for all calibers above
- Shotshell reloading kit
Last Edited:
