Dillon case feeder

[thebigbaby]

Anyone know where I can find the model number or if it will work on a 550?

Read More

 

[Newberg]

It will fit, you just need to mount it to the right pole. As seen in the photo I've attached.

You'll also need the drop tube.

 

[Newberg]

So you've got just the top part.

You need the other parts.

 

[thebigbaby]

10-4, thank you for the info.

 

[TDH]

Call or email Dillon - they usually have a 'parts' section that show the part #s and allow you to buy them. I didn't see it for that case feeder, but I bet they sell them. I'd guess you have the most expensive piece.
https://www.dillonprecision.com/media/manuals/dillon-rl550b-casefeed-manual-english.pdf < this shows part numbers on page 6.

 

[MikeInOr]

I didn't think the 550 had the capability to use a case feeder? I thought that only 650 and above had the mechanism to slide the case into the case indexing plate. As far as I know there is no way to adapt a case feeder to a 550.

 

[Newberg]

Casefeeder | RL550 Series

An automatic casefeed system, similar to the one used on Dillon's commercial-grade Super1050 machine and the XL750, is now available for your RL550 series press. You simply dump a quart of cases into the hopper and turn it on. The motor-driven disc fills the casefeed tube, a micro-switch shuts...

www.dillonprecision.com

 

[MikeInOr]

Casefeeder | RL550 Series

An automatic casefeed system, similar to the one used on Dillon's commercial-grade Super1050 machine and the XL750, is now available for your RL550 series press. You simply dump a quart of cases into the hopper and turn it on. The motor-driven disc fills the casefeed tube, a micro-switch shuts...

www.dillonprecision.com

Cool! I had no idea that had developed this. Is it reliable?

 

[solv3nt]

Cool! I had no idea that had developed this. Is it reliable?

It's a Dillon.

 

[Stomper]

It's a Dillon.

Not to be confused with the Chinese knock-off, Dillion.