Dillon 550 setup, pistol primers, powder, brass (as a lot)

bking · Apr 20, 2021

Selling my entire reloading setup, including supplies as a lot. This is one big package, I'm not looking to sell it bit-by-bit. $2,000 cash or gold for the lot. I'm located in Portland.

(edited to add photos)

Dillon RL 550B loader w/ LED kit
Dillon Strong Mount
9mm caliber conversion kit & Dillon dies
.38spl / .357mag caliber conversion kit & Dillon dies
.44spl / .44mag caliber conversion kit & Dillon dies
.45acp / .45gap caliber conversion kit & Dillon dies
3 toolheads w/ powder funnels
Arredondo micrometer powder slide
primer flip tray
Dillon beam powder scale
powder trickler
wet pin tumbler with stainless steel pins
Dillon media separator
4 extra large primer tubes
Speer Reloading Manual #14

Also some supplies will be included:

large pistol primers (roughly 2,650 count CCI, Fed)
large pistol magnum primers (1,000 count CCI, Fed)
small pistol primers (1,600 count)
small pistol magnum primers (roughly 638 count)
WST Powder (roughly 1.75 lbs)
231 powder (roughly 1.25 lbs)
clays powder (1 lbs)
VV N310 powder (roughly 2.5 bottles)
lots of .38spl brass
a bunch of .357 brass
lots of 9mm brass
lots of .45acp brass

Longwalkhome · Apr 20, 2021

your box is full so I can't pm

bking · Apr 20, 2021

Longwalkhome said:
your box is full so I can't pm

Sorry, cleared it out.

Longwalkhome · Apr 20, 2021

May as well ask you here if you could post pictures of what you are selling. Reason being it will save a lot of questions.

Longwalkhome · Apr 27, 2021

Very nice setup, glwts

ajgunner · Apr 27, 2021

Just to clarify, I do NOT know this seller.

Great set up for those of you thinking about getting into loading your own. It would take you months of hard searching to put this set up together during current times. Heck just the Dillon stuff alone is back ordered for 2-6 months. Get off your hands and step up---years from now you will still be smiling.

bking · Apr 27, 2021

ajgunner said:
Just to clarify, I do NOT know this seller.

Great set up for those of you thinking about getting into loading your own. It would take you months of hard searching to put this set up together during current times. Heck just the Dillon stuff alone is back ordered for 2-6 months. Get off your hands and step up---years from now you will still be smiling.

Thanks. I put this together because I was shooting bullseye outdoors and needed precise loads to shoot at a 2" X ring at 50 yards with .45 and .32 acp pistols. I don't shoot outdoor anymore and with times as they are I figure someone else can make better use of the equipment and components.