Quantcast
  1. Sign up now and join over 35,000 northwest gun owners. It's quick, easy, and 100% free!

WTS OR Dillon 1200 trimmer motor + .223 die

Discussion in 'Reloading Classifieds' started by Modly, Sep 3, 2014.

  1. Modly

    Modly Beaverton Active Member

    Messages:
    173
    Likes Received:
    54
    I upgraded to the 1500 motor, so the 1200 is going.

    I trimmed about 4000 pieces with it, and the die has about 500 pieces through it. The die is from CH4D (not dillon, which I ended up ordering a carbide version of).

    $235 for everything, or best offer. Shipping for $12.
    Will sell just the die for $25, and the trimmer for $215.

    Sold!

    IMG_1468.JPG

    IMG_1469.JPG
     
    Last edited: Dec 16, 2014
  2. Silver Hand

    Silver Hand Southern Oregon Coast Well-Known Member

    Messages:
    871
    Likes Received:
    330
    This would make someone a great buy
     
  3. Clayton

    Clayton Vancouver, Washington New Member

    Messages:
    15
    Likes Received:
    2
    Have you heard anything about the 1500 working on any other press than the xl 650?
     
  4. tlfreek

    tlfreek Vancouver WA Active Member

    Messages:
    697
    Likes Received:
    211
    do you still need to handle the brass to deburr and chamfer?
     
  5. Modly

    Modly Beaverton Active Member

    Messages:
    173
    Likes Received:
    54
    Not yet.

    Depends. I only deburr the blackout brass. If it is only trimming a few thou, the burr is so minimal that I don't worry about it.
     
  6. Modly

    Modly Beaverton Active Member

    Messages:
    173
    Likes Received:
    54
    Price dropped to $245 for everything.
     
  7. pry

    pry pdx Member

    Messages:
    96
    Likes Received:
    37
    The cutter on the 1200 is set at a slight angle so it puts a slight bevel on the case plus it spins so fast it doesn't really leave a burr. You could also use a resize die backed off n with the decapping pin removed after the trimmer so the expander will smooth the edges too
     
Thread Status:
Not open for further replies.