- Messages
- 49
- Reactions
- 91
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
You definitely want to do a test run. If you cannot get an exact sample of the metal in question you should sand off a small spot under the grip or in another unnoticeable spot and test whatever cold blue you are planning on using to see how well it matches your existing finish. All cold blues are not the same; there are different formulas, different concentrations and sometimes even temperature and humidity can impact the final look of the process. Just because you have a "cold blue" factory finish and bought a product that says "cold blue in a can" does not mean your touch-up work will seamlessly blend with the existing finish.Thanks for the information and the support. I was going to do a small touch up on a side panel of a revolver, but I remember the smell of cold bluing is awful. I'm going to do more research on the prep work before I get started and do a test run as well.
This, absolutely. I'd much, much rather have a gun with honest wear on it than cold bluing. Collector piece of not.Also, just because it needs to be said, don't do this to historical pieces. A huge part of their value is the wear they have acquired over a century or two, and "refinishing" them can destroy the monetary and historical value of the piece. Just leave it alone and enjoy the history you have in front of you.
Yes, this was my very first thought when I read, "cold blue" in the subject line.Comes in handy at the gun show , when the seller says that the gun is excellent with the original finish...
The cold blue comes right off with a rag & just about any solvent...This, absolutely. I'd much, much rather have a gun with honest wear on it than cold bluing. Collector piece of not.
Yes, this was my very first thought when I read, "cold blue" in the subject line.
Black magic marker.The cold blue comes right off with a rag & just about any solvent...
If it is not a historical piece I honestly do not care. I have some guns I have bubba'd just for kicks. But they are usually new makes or worthless trash. I have a few more in the safe waiting for the same treatment. If you want a gun with a specific look just go for it. Worst you can do is need a new gun.This, absolutely. I'd much, much rather have a gun with honest wear on it than cold bluing. Collector piece of not.
Remember that cold blue smell....
Comes in handy at the gun show , when the seller says that the gun is excellent with the original finish....
To be clear...I have no issue with a re-finish or touch up....or even a complete overhaul of a used firearm.
I just expect honestly on the seller's part.
Andy
Vote Red?Does anybody know how to get rid of the smell?
Damn man...here I thought we were friends....Well, hopefully you don't ask to smell the seller's fingers to confirm a suspicious piece….. they might not smell like cold blue!
I know, I know… how old am I?