- Messages
- 3,018
- Reactions
- 10,611
I've been following @RangerEric 's thread and have a couple questions of my own but didn't want to muddy the other thread.
I'm wanting to do a simple budget project using a Palmetto PA10 rifle kit on a JMT 80% lower.
Palmetto is pretty tight lipped about compatability but it appears that the Gen2 is a low profile DPMS pattern (old Gen1 is high profile). Palmetto also advises against mixing their components with other manufacturers. JMT just states that their lower is "DPMS compliant", whatever that means. The interweb hasn't been a ton of help yet.
Can anyone confirm or deny compatability?
I'm wanting to do a simple budget project using a Palmetto PA10 rifle kit on a JMT 80% lower.
Palmetto is pretty tight lipped about compatability but it appears that the Gen2 is a low profile DPMS pattern (old Gen1 is high profile). Palmetto also advises against mixing their components with other manufacturers. JMT just states that their lower is "DPMS compliant", whatever that means. The interweb hasn't been a ton of help yet.
Can anyone confirm or deny compatability?