7.62x39 AR Issue

[anthony r]

Hey all I know this is an old thread just came across it on the Internet

Having the same exact problem on a build, I just finished. I was wondering if you came to your conclusion yet

 

[arakboss]

Hey all I know this is an old thread just came across it on the Internet

Having the same exact problem on a build, I just finished. I was wondering if you came to your conclusion yet

What does the feed ramp(s) look like? Can you detail the problems and what you have done so far to remedy them?

 

[arakboss]

Hey all I know this is an old thread just came across it on the Internet

Having the same exact problem on a build, I just finished. I was wondering if you came to your conclusion yet

Can you detail your problems and what you have tried so far to remedy them? What type of ammo have you tried?

 

[Texmex247]

Head spacing. Try a different bcg. Ars should be universal parts guns but I've had a binding bcg produce the same problems. My issue with my x39 AR is finding reliable magazines. Could also be a tight chamber but I bet it doesn't cooperate with some no go gauges. My Czech vz58 hums through new ammo or reloads but I had to use small base dies to get them to run in my vz2008. It runs an American barrel so just a tight chamber but still a hoot to shoot.