X carry Glock 45 slide

gcoop · May 18, 2025

Got a Glock 45 slide, but will fit on all gen5 45, 19 and 19x. Cut by boogeyman customs before they closed up shop. It's their x-carry cut cerakoted in sniper gray, comes with the blacked out sites and milled for the Steiner MPS and comes with the correct plate, can also run the acro if wanted.
No internals

$400.00
Or trade interest: oe glock parts, frames and slides, macro parts, p320 fullsize, pistol optics

1775usmc · May 19, 2025

What is the slide direct milled for?

Elias2x · May 19, 2025

1775usmc said:
What is the slide direct milled for?

mps/acro

1775usmc · May 19, 2025

Elias2x said:
mps/acro

That looks like an Acro adapter plate. I'm curious as to what it's direct milled for. Thanks though.

Elias2x · May 20, 2025

1775usmc said:
That looks like an Acro adapter plate. I'm curious as to what it's direct milled for. Thanks though.

He literally lists it's milled for the MPS which is the same foot print as across but okay bud….

1775usmc · May 20, 2025

Elias2x said:
He literally lists it's milled for the MPS which is the same foot print as across but okay bud….

Direct mill means directly milled into the slide. The minute you have to use a plate (as you can see with those 2 screws in the above picture) it's not direct milled. Our definitions must be different.

I asked the OP what it's milled for under that plate. How about he answers the question as it is his slide….

Elias2x · May 20, 2025

1775usmc said:
Direct mill means directly milled into the slide. The minute you have to use a plate (as you can see with those 2 screws in the above picture) it's not direct milled. Our definitions must be different.

I asked the OP what it's milled for under that plate. How about he answers the question as it is his slide….

cant wait to see his response

1775usmc · May 20, 2025

Elias2x said:
cant wait to see his response

Well if he says it's direct milled for an Acro/MPS then I'll just move on. Because it is obviously using a plate. Which means it's milled for something else. Or it's been milled with the MOS pattern to be able to take MOS pattern plates.

He's been on recently and hasn't answered. I'm not holding my breath.

gcoop · May 23, 2025

Hey guys sorry for the late response! When I was online it never gave me notifications. Weird..

But the slide is directly milled for the MPS plate that comes with the optic. Similar to an mos system but only for Steiners plate. I've had both the MPs and Acro on it.

Hopefully this helps clear things up!

Sorry again

Elias2x · May 23, 2025

gcoop said:
Hey guys sorry for the late response! When I was online it never gave me notifications. Weird..

But the slide is directly milled for the MPS plate that comes with the optic. Similar to an mos system but only for Steiners plate. I've had both the MPs and Acro on it.

Hopefully this helps clear things up!

Sorry again

Tried telling him

1775usmc · May 23, 2025

gcoop said:
Hey guys sorry for the late response! When I was online it never gave me notifications. Weird..

But the slide is directly milled for the MPS plate that comes with the optic. Similar to an mos system but only for Steiners plate. I've had both the MPs and Acro on it.

Hopefully this helps clear things up!

Sorry again

So it's milled for a plate not an optic? This is what direct mill for an ACRO looks like. If it uses a plate that not direct mill.

Is it the same footprint as the MOS and uses MOS pattern plates?

gcoop · May 23, 2025

Yes i have plenty of acro cuts and this milled for the MPS plate which is exclusively their footprint and is NOT the same as the mos system

1775usmc · May 23, 2025

gcoop said:
Yes i have plenty of acro cuts and this milled for the MPS plate which is exclusively their footprint and is NOT the same as the mos system

Gotcha. So for other optics your SOL on plates? Cause they are out of business now?

Thanks for clarifying the hole pattern under the plate though. I appreciate it. I try to avoid using plates and prefer direct mill so I am gunna pass.