WTB WA WTB 6.5 Creedmoor Brass

Discussion in 'Reloading Supplies Wanted' started by varminthunter1, Mar 7, 2016.

Tags:
  1. varminthunter1

    varminthunter1
    South Seattle, WA
    Member

    Messages:
    79
    Likes Received:
    8
  2. clownbuster

    clownbuster
    Vancouver, WA
    Active Member

    Messages:
    220
    Likes Received:
    47
    image.jpeg
    image.jpeg
    I make custom, ready-to-load Lapua 6.5 Creedmoor cases from brand new Lapua 308 Winchester brass for $2.50/case + shipping if your interested. Cases are lubed, reduced and formed to 6.5 Creedmoor, ran through Redding S-Type bushing die (expander-ball removed), inside necks are then expanded, outside necks are turned to .015", polished to match with steel wool, trimmed to 1.910 length, deburred/chamfered case mouths inside and out. Benefits are .003 thicker case necks, weight is 20-25 grains heavier and impeccable Lapua-quality primer pockets. My PRS guys have reported over 30 firings and still going without issue. I personally have over 20 firings on my cases and show no signs of problems.
     
    Last edited: Mar 8, 2016

Share This Page