- Messages
- 10,309
- Reactions
- 19,622
- Ad Type
- For Sale
- Price
- $650
- Manufacturer
- Other / Not Listed
- Caliber
- Other / Not Listed
- City
- Beaverton
- State
- Oregon
- Zip Code
- 97005
More discussion and photos of it here
www.northwestfirearms.com
I picked up a Parker Hale side mount, the base and rings can be harder to find so I modified a Leupold Adjusto-Mount by filing the bottom flat (it still needs a hole drilled and taped, there photo shows were) and if you want to get real tricksey you could mill a cut so the mount sat lower on the base (the yellow line in the photo) This mount has built in W&E adjustments which more than likely would not be needed in this application, but it's cool that they are there
The scope is an older Leupold 3x, one of the ones with slightly longer eye relief.
It comes with 45 rounds factory PPU 303 ammo (the boxes were trashed when I got it so I put it in the plastic case) 5 rounds fired by me PPU, 14 cases of what looks like once fired tumbled PPU and 5 rounds mixed headstamp primed
The 303 dies are used but are in great shape and the Lee shell holder is included
The peep sight in the other thread photos is included
This one does need a little more work done on it, the receiver needs 3 holes D&T and the mount need one hole D&T or a front sight base if you want to run it with the peeps. If you have run across my ads before you might notice that I list most things right around $650 and I guess that's because that is about the amount I get into a project before I lose interest and start looking for something new
Feel free to ask questions, I'm not the pixel police and don't care if folks ask questions in my ads
$650.00 cash for all of it
I like A Cut Above (who doesn't!) but I'm open to an FFL of your choice
Shipping would be ok, but no ammo unless you want to pay whatever that adds to the normal shipping charges
Possible trades / trades + cash
If you have something else in mind for a trade that you think fits within my interests go for it, worse I can do is say no
I'm not overly concerned with cosmetics
Savage 340 (or variant) in 30-30 factory D&T for scope mount
S&W 39-2 / 439 / 539 / 639
S&W 422 / 622 either 4" or 6"
Cartridge converted black powder pistol
Cimarron / Uberti SA in 357/38 spl
#11 percussion caps
Open top pistol in 38spl or 45lc
Aguila SSS 22lr ammo
Chassis for a CZ 457
My new (to me!) 303 Brit custom rifle!
I'll just leave this here for ya'll to figure out :cool:
www.northwestfirearms.com
I picked up a Parker Hale side mount, the base and rings can be harder to find so I modified a Leupold Adjusto-Mount by filing the bottom flat (it still needs a hole drilled and taped, there photo shows were) and if you want to get real tricksey you could mill a cut so the mount sat lower on the base (the yellow line in the photo) This mount has built in W&E adjustments which more than likely would not be needed in this application, but it's cool that they are there
The scope is an older Leupold 3x, one of the ones with slightly longer eye relief.
It comes with 45 rounds factory PPU 303 ammo (the boxes were trashed when I got it so I put it in the plastic case) 5 rounds fired by me PPU, 14 cases of what looks like once fired tumbled PPU and 5 rounds mixed headstamp primed
The 303 dies are used but are in great shape and the Lee shell holder is included
The peep sight in the other thread photos is included
This one does need a little more work done on it, the receiver needs 3 holes D&T and the mount need one hole D&T or a front sight base if you want to run it with the peeps. If you have run across my ads before you might notice that I list most things right around $650 and I guess that's because that is about the amount I get into a project before I lose interest and start looking for something new
Feel free to ask questions, I'm not the pixel police and don't care if folks ask questions in my ads
$650.00 cash for all of it
I like A Cut Above (who doesn't!) but I'm open to an FFL of your choice
Shipping would be ok, but no ammo unless you want to pay whatever that adds to the normal shipping charges
Possible trades / trades + cash
If you have something else in mind for a trade that you think fits within my interests go for it, worse I can do is say no
I'm not overly concerned with cosmetics
Savage 340 (or variant) in 30-30 factory D&T for scope mount
S&W 39-2 / 439 / 539 / 639
S&W 422 / 622 either 4" or 6"
Cartridge converted black powder pistol
Cimarron / Uberti SA in 357/38 spl
#11 percussion caps
Open top pistol in 38spl or 45lc
Aguila SSS 22lr ammo
Chassis for a CZ 457
