- Messages
- 350
- Reactions
- 194
- Ad Type
- For Sale
- Price
- $2000
- Manufacturer
- STI International
- Caliber
- 40 S&W
- City
- Beaverton
- State
- Oregon
Selling my STI 2011 DVC Limited (40 cal) with the box and all the standard goodies + 2 magazines. It was my match gun and used almost weekly last year. Always cleaned/maintained after matches. Still has a tight lockup and no slop.
I just did a complete takedown/cleaning and have replaced/upgraded the following parts...
Just replaced....
fiber optic (GREEN)
springs (mainspring/recoil spring/magazine springs) * all with factory STI springs *
magazine follower * STI Factory *
extractor * STI factory *
Guide Rod (Dawson toolless)
magwell
magwell insert
Upgrades....
Firing Pin (Limcat extended firing Pin)
kensight rear sight
front sight has been filed (top of sight) to pull the fiber optic closer to the top of the sight
Gun has run flawlessly for 12k rds prior to replacing all the wearable parts as listed above.
2.75lb trigger.
$2000 (with Extreme Edge Grip)
($2500 w black cerakoted cheely e2 grip)
I just did a complete takedown/cleaning and have replaced/upgraded the following parts...
Just replaced....
fiber optic (GREEN)
springs (mainspring/recoil spring/magazine springs) * all with factory STI springs *
magazine follower * STI Factory *
extractor * STI factory *
Guide Rod (Dawson toolless)
magwell
magwell insert
Upgrades....
Firing Pin (Limcat extended firing Pin)
kensight rear sight
front sight has been filed (top of sight) to pull the fiber optic closer to the top of the sight
Gun has run flawlessly for 12k rds prior to replacing all the wearable parts as listed above.
2.75lb trigger.
$2000 (with Extreme Edge Grip)
($2500 w black cerakoted cheely e2 grip)
- I agree to the classified rules and terms of service
Last Edited: