- Ad Type
- For Sale
- Price
- $190
- Manufacturer
- Other / Not Listed
- City
- Oregon City
- State
- Oregon
Top is Mid-length gas system 1/7 twist chrome line with FSB $185
2nd is a 14.5 chrome lined hammer forged barrel it had a pinned flash hider one it so the threads there is a dimple in the threads $120
Bottom low profile gas block is held on by taper pin and set screw so it won't move. the taper pin is not hammered all the way in so you can remove it to add your special barrel nut. $145
Please note I do have parts to complete anyone one of this barresl. A2, A1C7, M4A3 as well as handguards and gas tubes and flash hiders muzzle breaks
Spikes NIB bolt new. The extractor retainer is not Spikes or NIB though but the bolt and extractor are. Please note the NIB finish makes this tight in new carriers but if you have a carrier with some mileage on it this just may be what you need $45
View attachment 614412
MORE PARTS FOR SALE
Flat top low profile ar15 upper with Anderson barrel
M4A2 Carbine style upper
264 LBC (6.5 Grendel) Type 2 Complete Upper For those of you what to hunt with your Ar15
M4 A2 Upper with 14.5" Bushmaster barrel Pinned flashhider for 16" barrel length
Spikes Tactical Barrels !!NEW SPIKES NIB BOLT ADDED 9/4!!!
2nd is a 14.5 chrome lined hammer forged barrel it had a pinned flash hider one it so the threads there is a dimple in the threads $120
Bottom low profile gas block is held on by taper pin and set screw so it won't move. the taper pin is not hammered all the way in so you can remove it to add your special barrel nut. $145
Please note I do have parts to complete anyone one of this barresl. A2, A1C7, M4A3 as well as handguards and gas tubes and flash hiders muzzle breaks
Spikes NIB bolt new. The extractor retainer is not Spikes or NIB though but the bolt and extractor are. Please note the NIB finish makes this tight in new carriers but if you have a carrier with some mileage on it this just may be what you need $45
View attachment 614412
MORE PARTS FOR SALE
Flat top low profile ar15 upper with Anderson barrel
Ar15 Flat top upper with 16" barrel $160
The gas block is buggered up because it's really tight which is a good thing. $160 no BCG and CH. Trades wanted Colt Ar15 Parts. Plastic 80% lower with Jig kit, Left-handed Ar15 parts and accessories.
www.northwestfirearms.com
M4A2 Carbine style upper
M4A2 Carbine style upper
Unknown Brand upper barrel is not chrome lined. The receiver does have some finish wear on the carry handle so don't expect a safe queen FSB uses a roll pin or straight pin not taper pins but it solid (no Bolt carrier group or charging handled) $250 Or would trade for or towards a Colt A1 or A2...
www.northwestfirearms.com
264 LBC (6.5 Grendel) Type 2 Complete Upper For those of you what to hunt with your Ar15
264 LBC (6.5 Grendel) Type 2 Complete Upper with Carbon Fiber FF tube $335 OPTIONS ADDED
This is a complete upper barrel is a BHA 264LBC 16" 1/9 twist. The barrel nut on the lightweight heat-dissipating carbon fiber float tube is a little chewed up but unless you are removing it, it is fine. It's complete with BCG and CH. less than 300 rds fired. If you don't want the float tube I...
www.northwestfirearms.com
M4 A2 Upper with 14.5" Bushmaster barrel Pinned flashhider for 16" barrel length
Spikes Tactical Barrels !!NEW SPIKES NIB BOLT ADDED 9/4!!!
Spikes Tactical Barrels !!NEW SPIKES NIB BOLT ADDED 9/4!!!
Top is Mid-length gas system 1/7 twist chrome line with FSB $185 2nd is a 14.5 chrome lined hammer forged barrel it had a pinned flash hider one it so the threads there is a dimple in the threads $120 Bottom low profile gas block is held on by taper pin and set screw so it won't move. the...
www.northwestfirearms.com
- I agree to the classified rules and terms of service
Last Edited: