Bronze Supporter
- Messages
- 490
- Reactions
- 362
- Ad Type
- For Sale
- Price
- $660
- Manufacturer
- Sig Sauer
- City
- Portland
- State
- Oregon
- Zip Code
- 97229
$660
Sig P229 Legion w/ Trijicon RMR Type 2 6.5 MOA SLIDE
Suppressor Sig XRay 3 sights for co-witnessing.
I had it milled and cerakoted Sig Dark Grey by the fine folks at Vulcan Machine Werks from Plano, TexasThe base PVD Legion gray as a lot of you know is prone to scratching. Folks here recommended cerakoting so I did.
In short, Legion Slide professionally milled with an RMR ready for putting on your current Legion P229.
Please note, that the barrel and recoil spring are not included.
Also, will not separate the RMR from the slide.
Real dollars if you wanted to put this together yourself (and these are street prices and don't include tax and shipping.):
$250 - Base P229 Legion Slide
$430 - Trijicon RMR
$200 - Slide milling & Cerakoting
$99 - XRay 3 suppressor sights
$979 is about what you'd pay to put on his together.
You could buy an RXP slide assembly from Sig direct for $699 (+tax & shipping) with a Romeo1 Pro. But it wouldn't have an RMR.
I can meet most anywhere around Portland but would prefer westside if possible or around Lloyd Center if not westside.
PM me with questions.
Sig P229 Legion w/ Trijicon RMR Type 2 6.5 MOA SLIDE
Suppressor Sig XRay 3 sights for co-witnessing.
I had it milled and cerakoted Sig Dark Grey by the fine folks at Vulcan Machine Werks from Plano, TexasThe base PVD Legion gray as a lot of you know is prone to scratching. Folks here recommended cerakoting so I did.
In short, Legion Slide professionally milled with an RMR ready for putting on your current Legion P229.
Please note, that the barrel and recoil spring are not included.
Also, will not separate the RMR from the slide.
Real dollars if you wanted to put this together yourself (and these are street prices and don't include tax and shipping.):
$250 - Base P229 Legion Slide
$430 - Trijicon RMR
$200 - Slide milling & Cerakoting
$99 - XRay 3 suppressor sights
$979 is about what you'd pay to put on his together.
You could buy an RXP slide assembly from Sig direct for $699 (+tax & shipping) with a Romeo1 Pro. But it wouldn't have an RMR.
I can meet most anywhere around Portland but would prefer westside if possible or around Lloyd Center if not westside.
PM me with questions.
- I agree to the classified rules and terms of service