- Messages
- 751
- Reactions
- 220
Hi there. While I wait for my trade in 10-6 to arrive at my FFl, I found a 2in .38spec barrel in my parts box. I can't remember when i picked it up but i believe it's for a non pinned K frame. Can I use a non pinned barrel on a 10-6?
Here are some measurements from the barrel.
Diameter of threads is .536
Throat diameter is .498
Diameter at the flat on the bottom of the throat is .474
Here are some measurements from the barrel.
Diameter of threads is .536
Throat diameter is .498
Diameter at the flat on the bottom of the throat is .474