Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Working over a feed ramp is way over rated
That depends on whether or not the feed ramp is correct, obviously. If it's at the specified angle of 31 to 31 1/2 degrees, then yes, it's not only over rated, it's stupid.
Agreed. The problem is it's one of the first "fixes" alot of people try by tackling it with a dremel!
The problem is it's one of the first "fixes" alot of people try by tackling it with a dremel!
I thought the "D" word was a no, no.
Sorry I should have clarified.
As for the fed ramp not being in spec, well that goes without saying.