Need someone to measure their glock

[muspelheim]

I've got a gen4 G40, and I'm trying to figure out whether it would be possible to install a pistol brace (https://www.octagonairsoft.com/prod...-umarex-vfc-set-for-g-series-toy-airsoft-part) intended for a "medium frame" Glock onto my gun. I'm hoping someone can measure their gen4 G17, G22, G34, or G19 for me to see how different theirs is from mine. I need measurements between the red lines and between the blue lines as shown in the photographs. For reference, my distances are 21mm (red) and 27mm (blue).

This brace kit is a copy of the now discontinued glock flux raider. Previously, flux sold a "heavy" version intended for large frame glocks, so i know it won't be a 1-to-1 fit, but i'm hoping with some finagling with a heat gun or possibly a dremel i can get it to work.

Thanks!

Read More

 

[1775usmc]

For a measly $2800 dollars you could have the real thing….. that's insane. Haha. Hope you can make the airsoft version work!

I have a 19X which is based on a Gen 4 frame I could measure. But I don't have calipers so the measurements with be rough.

https://www.gunbroker.com/item/1144392281

 

[Tlock]

For a measly $2800 dollars you could have the real thing….. that's insane. Haha. Hope you can make the airsoft version work!

https://www.gunbroker.com/item/1144392281

Wtf???? Why is that so much?

 

[1775usmc]

Wtf???? Why is that so much?

Cause it's "discountinued." Same reason members here try selling their $400 dollars guns for over a grand.

 

[Tlock]

Cause it's "discountinued." Same reason members here try selling their $400 dollars guns for over a grand.

Is 2x selling gunjoker too?

 

[1775usmc]

Is 2x selling gunjoker too?

They're all over the place.

 

[muspelheim]

For a measly $2800 dollars you could have the real thing….. that's insane. Haha. Hope you can make the airsoft version work!

I have a 19X which is based on a Gen 4 frame I could measure. But I don't have calipers so the measurements with be rough.

https://www.gunbroker.com/item/1144392281

Yeah I couldn't believe how much the used ones were going for.

Even if you could eyeball it off a ruler with millimeter markings it would be helpful; I'm just trying to figure out roughly how close the measurements are to figure out if it's worth getting one to try and modify it.

 

[1775usmc]

Yeah I couldn't believe how much the used ones were going for.

Even if you could eyeball it off a ruler with millimeter markings it would be helpful; I'm just trying to figure out roughly how close the measurements are to figure out if it's worth getting one to try and modify it.

Will do once I'm home from the gym.

 

[VinnieBoomBah]

There are a couple videos comparing the airsoft version to the 'real' one and the difference is much less than you might first think
I have my theories as to why that is

 

[Camelfilter]

$60 Glock brace:

AUSTRIAN MADE BUBITS TYPE G1 GLOCK PISTOL STABILIZING BRACE & PERSONAL DEFENSE TOOL

Bubits Type G1 Glock Pistol Stabilizing Brace & Personal Defense Tool, Wilhelm Bubits, Made in Austria, BUBITS-TYPE-G1, RTG Parts

www.robertrtg.com

Just saying...

 

[1775usmc]

@muspelheim here ya go. Not the best or most accurate. Black pin was flush with both sides and the Glock tool was taped off the mark the outer edges.

 

[DirectDrive]

Is this another Glock measuring contest ?

 

[1775usmc]

Is this another Glock measuring contest ?

If so I'll loose.

 

[Tlock]

If so I'll loose.

Ya no kidding, yours isn't even black!

 

[1775usmc]

Ya no kidding, yours isn't even black!

But it's "textured."

 

[Nosferatu]

Ya no kidding, yours isn't even black!

Probably doesn't Pee320 though.

 

[Koda]

I've got a gen4 G40, and I'm trying to figure out whether it would be possible to install a pistol brace (https://www.octagonairsoft.com/prod...-umarex-vfc-set-for-g-series-toy-airsoft-part) intended for a "medium frame" Glock onto my gun. I'm hoping someone can measure their gen4 G17, G22, G34, or G19 for me to see how different theirs is from mine. I need measurements between the red lines and between the blue lines as shown in the photographs. For reference, my distances are 21mm (red) and 27mm (blue).

G40SF, Gen3.
Red: 21.5mm
Blue: 26.5mm

measured with calipers... the SF frame checkering looks different than yours at the pin holes.

 

[muspelheim]

@muspelheim here ya go. Not the best or most accurate. Black pin was flush with both sides and the Glock tool was taped off the mark the outer edges.

View attachment 2223899 View attachment 2223900 View attachment 2223901 View attachment 2223903

Thanks! That looks very close, I think that means i can pull the trigger on this thing.

 

[muspelheim]

$60 Glock brace:

AUSTRIAN MADE BUBITS TYPE G1 GLOCK PISTOL STABILIZING BRACE & PERSONAL DEFENSE TOOL

Bubits Type G1 Glock Pistol Stabilizing Brace & Personal Defense Tool, Wilhelm Bubits, Made in Austria, BUBITS-TYPE-G1, RTG Parts

www.robertrtg.com

Just saying...

Interesting...that one does make my NFA spider senses tingle though.

 

[Camelfilter]

Interesting...that one does make my NFA spider senses tingle though.

We have a couple.

Zero NFA concerns. None.

I'm reasonably knowledgeable regarding such...