- Messages
- 20
- Reactions
- 28
- Ad Type
- For Sale
- For Trade
- Price
- $4500
- Manufacturer
- Other / Not Listed
- Caliber
- Other / Not Listed
- City
- Happy Valley
- State
- Oregon
- Zip Code
- 97086
Hello All!
You may have recently seen my separate ads for my Mega Arms MATEN AR-10 in .308 Win. and Mega Arms AR-15 in 5.56x45 NATO. Well in my interest and the interest of better pricing, I've decided to sell them together because why have just one when you can have two! (plus the case is cut fit them both together). You get both rifles, tools, pelican hardcases for the rifles and the tools, and a ton of extras (extra scope, charging handles, bcg etc.). Also included if your state allows them are a bunch of mags. And if you want to I have 800 rds of 5.56 and a couple hundred of .308 that I can sell with them for some extra dough. The specs and extras are listed below! If you have any questions please shoot me a message. I'm selling to clean out the safe and fund getting into get some camera gear, so if you have a camera & lenses you'd like to trade let me know!
AR-10:
Ambi Upper / Lower: Mega Arms MATEN with 16" handguard. I bought this before Mega was bought out by ZEV Industries.
BCG: JP Rifles LMOS BCG w/ HP Bolt (HP bolt allows you to shoot 6.5 Creed without swapping the BCG, if you change the barrel over etc.) Nickle Boron
Trigger: Geissele SSP Trigger
Barrel: Rainier Arms Match 18"
A Bunch of JP Rifles Items: Enhanced Carbine Buffer Tube, Silent Captured Spring Buffer, Upper Lower Parts Kit, Ambi Mag Release, Adjustable Gas Block, Flat Top Scope Mount & Rings
Charging Handle: Radian Raptor SD
Stock: Magpul PRS Gen 3
Sights: Bushnell Illuminated Match Pro 6x24x50 w/ shade; and Hex Dragonfly Red Dot on a 45 deg. offset.
Bipod: Atlas, PSR BT46-LW17
Paint Job: The finest rustoleum money can buy.
AR-10 Mags:
1EA 5RD SS Mag
2 EA 10RD SS MAG
2 EA 10RD Magpul Gen 3 mags
Mags if allowed in your state: WILL NOT SELL OTHERWISE
The above
4 EA 20RD SS MAG
2 EA 20RD Magpul Gen 3 Mags
Tools & Extras for the AR-10:
Geissele .308 Reaction Rod (must have for working on this for anything on the barrel etc.)
Forrester Go, No Go Gauges,
JP Case Gauge
Barell Nut Wrench
JP Heat Eliminator which DOES NOT FIT the current barrel.
Forward Controls Charging handle which doesn't latch properly.
Standard Radian Raptor Charging Handle
Magpul Sling.
AR-15:
Ambi Upper Lower: Mega Arms Billet GTR-3H Ambi & Upper
JP Rifles Upper/Lower Parts Kit
BCG: Aero Precision Nickel Boron
Barrel: Rainier Arms
Trigger: CMC CCT
Sights: SIG Romeo 7 Red Dot
Radian Raptor Charging Handle
Detachable Carry Handle (which honestly for the life of me can't remember what it is, Brownell's Maybe?)
JP Rifles A2 Front Sight / Adjustable Gas Block
Magpul Furniture
3 Pronged Muzzle Device.
Paint Job: The finest rustoleum money can buy.
AR-15 Mags:
10 EA 30 RD Magpul Mags
4 EA 20RD Duramag SS Mags
Extras for AR-15:
Rainier Arms BCG and Charging Handle
Random Lower Parts Bag
Three Extra Handguards
A bunch of Magpul rail mounts etc.
Compensator
Forrester Go - NoGo Gauges
Bushnell AR Optics 1x6x24 Illuminated Scope (if you want to take the carry handle off)
Case:
Pelican Hard Case with foam cutouts.
You may have recently seen my separate ads for my Mega Arms MATEN AR-10 in .308 Win. and Mega Arms AR-15 in 5.56x45 NATO. Well in my interest and the interest of better pricing, I've decided to sell them together because why have just one when you can have two! (plus the case is cut fit them both together). You get both rifles, tools, pelican hardcases for the rifles and the tools, and a ton of extras (extra scope, charging handles, bcg etc.). Also included if your state allows them are a bunch of mags. And if you want to I have 800 rds of 5.56 and a couple hundred of .308 that I can sell with them for some extra dough. The specs and extras are listed below! If you have any questions please shoot me a message. I'm selling to clean out the safe and fund getting into get some camera gear, so if you have a camera & lenses you'd like to trade let me know!
AR-10:
Ambi Upper / Lower: Mega Arms MATEN with 16" handguard. I bought this before Mega was bought out by ZEV Industries.
BCG: JP Rifles LMOS BCG w/ HP Bolt (HP bolt allows you to shoot 6.5 Creed without swapping the BCG, if you change the barrel over etc.) Nickle Boron
Trigger: Geissele SSP Trigger
Barrel: Rainier Arms Match 18"
A Bunch of JP Rifles Items: Enhanced Carbine Buffer Tube, Silent Captured Spring Buffer, Upper Lower Parts Kit, Ambi Mag Release, Adjustable Gas Block, Flat Top Scope Mount & Rings
Charging Handle: Radian Raptor SD
Stock: Magpul PRS Gen 3
Sights: Bushnell Illuminated Match Pro 6x24x50 w/ shade; and Hex Dragonfly Red Dot on a 45 deg. offset.
Bipod: Atlas, PSR BT46-LW17
Paint Job: The finest rustoleum money can buy.
AR-10 Mags:
1EA 5RD SS Mag
2 EA 10RD SS MAG
2 EA 10RD Magpul Gen 3 mags
Mags if allowed in your state: WILL NOT SELL OTHERWISE
The above
4 EA 20RD SS MAG
2 EA 20RD Magpul Gen 3 Mags
Tools & Extras for the AR-10:
Geissele .308 Reaction Rod (must have for working on this for anything on the barrel etc.)
Forrester Go, No Go Gauges,
JP Case Gauge
Barell Nut Wrench
JP Heat Eliminator which DOES NOT FIT the current barrel.
Forward Controls Charging handle which doesn't latch properly.
Standard Radian Raptor Charging Handle
Magpul Sling.
AR-15:
Ambi Upper Lower: Mega Arms Billet GTR-3H Ambi & Upper
JP Rifles Upper/Lower Parts Kit
BCG: Aero Precision Nickel Boron
Barrel: Rainier Arms
Trigger: CMC CCT
Sights: SIG Romeo 7 Red Dot
Radian Raptor Charging Handle
Detachable Carry Handle (which honestly for the life of me can't remember what it is, Brownell's Maybe?)
JP Rifles A2 Front Sight / Adjustable Gas Block
Magpul Furniture
3 Pronged Muzzle Device.
Paint Job: The finest rustoleum money can buy.
AR-15 Mags:
10 EA 30 RD Magpul Mags
4 EA 20RD Duramag SS Mags
Extras for AR-15:
Rainier Arms BCG and Charging Handle
Random Lower Parts Bag
Three Extra Handguards
A bunch of Magpul rail mounts etc.
Compensator
Forrester Go - NoGo Gauges
Bushnell AR Optics 1x6x24 Illuminated Scope (if you want to take the carry handle off)
Case:
Pelican Hard Case with foam cutouts.
