- Messages
- 20
- Reactions
- 28
- Ad Type
- For Sale
- Price
- $4000
- Manufacturer
- Other / Not Listed
- Caliber
- 308 Winchester
- City
- Happy Valley
- State
- Oregon
- Zip Code
- 97086
Hello All!
Up for sale is my AR-10 Build that I completed a couple of years ago when I got bored. The following are the details. If I missed something or you have a question please reach out! Also apologies for not creating a separate ad for the tools and the case. They are specific to this rifle so I figured they should be...included with the rifle. Thing is a tack driver and so fun to shoot.
Ambi Upper / Lower: Mega Arms MATEN with 16" handguard. I bought this before Mega was bought out by ZEV Industries.
BCG: JP Rifles LMOS BCG w/ HP Bolt (HP bolt allows you to shoot 6.5 Creed without swapping the BCG, if you change the barrel over etc.)
Trigger: Geissele SSP Trigger
Barrel: Rainier Arms Match 18"
A Bunch of JP Rifles Items: Enhanced Carbine Buffer Tube, Silent Captured Spring Buffer, Upper Lower Parts Kit, Ambi Mag Release, Adjustable Gas Block, Flat Top Scope Mount & Rings
Charging Handle: Radian Raptor SD
Stock: Magpul PRS Gen 3
Sights: Bushnell Illuminated Match Pro 6x24x50 w/ shade; and Hex Dragonfly Red Dot on a 45 deg. offset.
Bipod: Atlas, PSR BT46-LW17
Paint Job: The finest rustoleum money can buy.
Mags:
1EA 5RD SS Mag
2 EA 10RD SS MAG
2 EA 10RD Magpul Gen 3 mags
Mags if allowed in your state: WILL NOT SELL OTHERWISE
The above
4 EA 20RD SS MAG
2 EA 20RD Magpul Gen 3 Mags
Tools & Extras & Case
Geissele .308 Reaction Rod (must have for working on this for anything on the barrel etc.)
Forrester Go, No Go Gauges,
JP Case Gauge
Barell Nut Wrench
JP Heat Eliminator which DOES NOT FIT the current barrel.
Forward Controls Charging handle which doesn't latch properly.
Standard Radian Raptor Charging Handle
Magpul Sling.
Pelican Hard Case with foam cutouts. Current Cutout has room for a standard AR-15 in there as well. You can always buy new foam to cut out how you please for like 70 bucks from Pelican's Website.
Thanks for looking!
Up for sale is my AR-10 Build that I completed a couple of years ago when I got bored. The following are the details. If I missed something or you have a question please reach out! Also apologies for not creating a separate ad for the tools and the case. They are specific to this rifle so I figured they should be...included with the rifle. Thing is a tack driver and so fun to shoot.
Ambi Upper / Lower: Mega Arms MATEN with 16" handguard. I bought this before Mega was bought out by ZEV Industries.
BCG: JP Rifles LMOS BCG w/ HP Bolt (HP bolt allows you to shoot 6.5 Creed without swapping the BCG, if you change the barrel over etc.)
Trigger: Geissele SSP Trigger
Barrel: Rainier Arms Match 18"
A Bunch of JP Rifles Items: Enhanced Carbine Buffer Tube, Silent Captured Spring Buffer, Upper Lower Parts Kit, Ambi Mag Release, Adjustable Gas Block, Flat Top Scope Mount & Rings
Charging Handle: Radian Raptor SD
Stock: Magpul PRS Gen 3
Sights: Bushnell Illuminated Match Pro 6x24x50 w/ shade; and Hex Dragonfly Red Dot on a 45 deg. offset.
Bipod: Atlas, PSR BT46-LW17
Paint Job: The finest rustoleum money can buy.
Mags:
1EA 5RD SS Mag
2 EA 10RD SS MAG
2 EA 10RD Magpul Gen 3 mags
Mags if allowed in your state: WILL NOT SELL OTHERWISE
The above
4 EA 20RD SS MAG
2 EA 20RD Magpul Gen 3 Mags
Tools & Extras & Case
Geissele .308 Reaction Rod (must have for working on this for anything on the barrel etc.)
Forrester Go, No Go Gauges,
JP Case Gauge
Barell Nut Wrench
JP Heat Eliminator which DOES NOT FIT the current barrel.
Forward Controls Charging handle which doesn't latch properly.
Standard Radian Raptor Charging Handle
Magpul Sling.
Pelican Hard Case with foam cutouts. Current Cutout has room for a standard AR-15 in there as well. You can always buy new foam to cut out how you please for like 70 bucks from Pelican's Website.
Thanks for looking!
