- Messages
- 80
- Reactions
- 28
- Ad Type
- For Sale
- Price
- $350
- City
- Vancouver
- State
- Washington
- Zip Code
- 98684
$350 CASH OR VENMO ONLY FOR ALL
Pls text Todd @ SIX19 four32 five5four8
I am not a machinist, I inherited these 95 Reamers +2 Bits. So please excuse my naming conventions. I do know these can sell for anywhere from $5 to $30 each.
Not all of the reamers are labeled with complete numbers indicating their size. I listed what info was printed and I measured them at the base since most of the tops are covered in wax. These are All USA Made, some are new, the rest are used but sharp as they were well taken care of.
Quantity is the first number in ( )
(7) Right Cut SAE:
(2) 13/64"
(1) 15/64"
(4) 17/64"
(4) Tap Handle:
(1) HSS K90 1/4" left cut
(1) A-P HS 5/89 3/8" (.3750) straight cut
(1) National 7/16" left cut
(1) JAL 5/16" HS left cut
(43) Right Cut Metric:
(3) 0652 - 75873 -1
(2) -1 0.1700
(1) -1 0.1705
(1) -1 0.1700
(1) -1 0652 - 75073 -1 -101
(1) -1 0.1690
(5) -1A 0.1700
(5) -133A 0.2240
(1) -45 0.2445
(1) 0.2630
(2) -3 0.2960
(1) -3 0.2965
(1) -3 0.2945
(1) -3 0.2950
(1) PTD M42 0.2969 - 0.2485
(1) S -3 0.2950
(3) -3 0.2945
(4) -3 0.2950
(3) S M-42 0.2969 - 0.2485
(2) M-33 0.3594 - 0.3110
(1) -4 0.3590
(2) PTD M42 0.4219 - 0.3740
(1) -50 0.4830
(41) Left Cut Metric:
(1) 0.1995 - 0.1840
(1) 0.1785
(2) -76A 0.1975
(1) -145 0.1840
(1) 1A 0.1845
(1) -101GT 0.1825
(2) -145 0.1825
(1) M33 0.2495 - 0.2330
(1) M33 0.2490 - 0.2330
(1) SEMCO 0.2480
(1) -46 0.2460
(3) -0.210A - 0.230
(2) -78 0.2590
(1) C652 - 75068 - 192 - 101 GT
(1) -192 0.2520
(1) -78 0.2595
(1) S -211A 0.3050
(2) 0.3120 - 0.2950
(1) -80R 0.3225
(1) S -170A 0.3200
(1) -211A 0.3045
(1) 3A C652 - 75068 - 003A - 101GT
(1) -3 0.3090
(1) -211A 0.3040
(1) S -3 0.3085
(1) -211A 0.3040
(2) -170A 0.3200
(4) S -198 0.3685
(1) M33 0.4370 - 0.4205
(1) -4 0.3710
(1) -101GT 900- 0.4970
(2) Bore Bits? (I don't know what these are called)
(1) 3/4 x 3/16 CR
(1) 3/8 x 3/16 x 1/8 R
Pls text Todd @ SIX19 four32 five5four8
I am not a machinist, I inherited these 95 Reamers +2 Bits. So please excuse my naming conventions. I do know these can sell for anywhere from $5 to $30 each.
Not all of the reamers are labeled with complete numbers indicating their size. I listed what info was printed and I measured them at the base since most of the tops are covered in wax. These are All USA Made, some are new, the rest are used but sharp as they were well taken care of.
Quantity is the first number in ( )
(7) Right Cut SAE:
(2) 13/64"
(1) 15/64"
(4) 17/64"
(4) Tap Handle:
(1) HSS K90 1/4" left cut
(1) A-P HS 5/89 3/8" (.3750) straight cut
(1) National 7/16" left cut
(1) JAL 5/16" HS left cut
(43) Right Cut Metric:
(3) 0652 - 75873 -1
(2) -1 0.1700
(1) -1 0.1705
(1) -1 0.1700
(1) -1 0652 - 75073 -1 -101
(1) -1 0.1690
(5) -1A 0.1700
(5) -133A 0.2240
(1) -45 0.2445
(1) 0.2630
(2) -3 0.2960
(1) -3 0.2965
(1) -3 0.2945
(1) -3 0.2950
(1) PTD M42 0.2969 - 0.2485
(1) S -3 0.2950
(3) -3 0.2945
(4) -3 0.2950
(3) S M-42 0.2969 - 0.2485
(2) M-33 0.3594 - 0.3110
(1) -4 0.3590
(2) PTD M42 0.4219 - 0.3740
(1) -50 0.4830
(41) Left Cut Metric:
(1) 0.1995 - 0.1840
(1) 0.1785
(2) -76A 0.1975
(1) -145 0.1840
(1) 1A 0.1845
(1) -101GT 0.1825
(2) -145 0.1825
(1) M33 0.2495 - 0.2330
(1) M33 0.2490 - 0.2330
(1) SEMCO 0.2480
(1) -46 0.2460
(3) -0.210A - 0.230
(2) -78 0.2590
(1) C652 - 75068 - 192 - 101 GT
(1) -192 0.2520
(1) -78 0.2595
(1) S -211A 0.3050
(2) 0.3120 - 0.2950
(1) -80R 0.3225
(1) S -170A 0.3200
(1) -211A 0.3045
(1) 3A C652 - 75068 - 003A - 101GT
(1) -3 0.3090
(1) -211A 0.3040
(1) S -3 0.3085
(1) -211A 0.3040
(2) -170A 0.3200
(4) S -198 0.3685
(1) M33 0.4370 - 0.4205
(1) -4 0.3710
(1) -101GT 900- 0.4970
(2) Bore Bits? (I don't know what these are called)
(1) 3/4 x 3/16 CR
(1) 3/8 x 3/16 x 1/8 R
- I agree to the classified rules and terms of service