Looking to help someone cast bullets to learn how ( east side of WA )

[cervelorod]

Started reloading again, and would like to get into casting my own bullets. I would enjoy helping/assisting/getting in the way of someone who has done this a time or two. Ideally someone in Eastern WA, the closer to Moses Lake the better.

Rod

Read More

 

[Alexx1401]

If you can't find anyone to show you hands on look up some video's. I learned how with a book back in the 70's. Now days there is a ton of video to show you the ins and outs. Its very simple to do but, SAFETY. Listen to the warnings about how to do it safely.

 

[P7M13]

If you haven't already, join up at castboolits.
A wealth of information there.

 

[Certaindeaf]

Started reloading again, and would like to get into casting my own bullets. I would enjoy helping/assisting/getting in the way of someone who has done this a time or two. Ideally someone in Eastern WA, the closer to Moses Lake the better.

Rod

Preheat/ dry all lead /equipment before introducing it to molten lead.
Don't beat on the sprue plate. I use a gloved hand to cut the sprue immediately after it freezes.
Temperature is very important.