Looking for someone to remove broken screws from slides

[S3v3n]

I now have (2) M&P Slides where the Optic screws have broken off and I am looking for someone local that can remove them. Any suggestions?

Read More

 

[Joe13]

Can always cut a slot in the screws and use a small flathead to pull them out.

But I don't have anyone for your actual question unfortunately.

 

[Juniper9mm]

https://bac-online.com/ez-out-screw-extractor/

 

[Koda]

I now have (2) M&P Slides where the Optic screws have broken off and I am looking for someone local that can remove them. Any suggestions?

Vernonia Machine Works is getting great reviews these days.

You wouldnt happen to be using the plastic optic mounting plates that come with the guns? Recently someone had the same exact thing happen to their M&P and the cause was the plastic plate flexing, if I recall.

Why did my optic shear off?

Yesterday, while shooting my S&W M&P 2.0 4.6 in barreled 10MM, My Holosun optic flew off and hit me in the face. The two attachments screws/bolts just sheared off - see attached pictures. I was shooting 180 grain projo's at 1,250 FPS. I used the plastic adaptor plate that came with the pistol at...

www.northwestfirearms.com

 

[S3v3n]

Vernonia Machine Works is getting great reviews these days.

You wouldnt happen to be using the plastic optic mounting plates that come with the guns? Recently someone had the same exact thing happen to their M&P and the cause was the plastic plate flexing, if I recall.

Why did my optic shear off?

Yesterday, while shooting my S&W M&P 2.0 4.6 in barreled 10MM, My Holosun optic flew off and hit me in the face. The two attachments screws/bolts just sheared off - see attached pictures. I was shooting 180 grain projo's at 1,250 FPS. I used the plastic adaptor plate that came with the pistol at...

www.northwestfirearms.com

So Yes Almost same gun. Except mine was the 5.6 10mm

 

[Koda]

So Yes Almost same gun. Except mine was the 5.6 10mm

recommend using metal adapter plates. IIRC mentioned in that thread....

 

[1911Fanatic]

Were the screws loctited in, and if so did you use blue or red?

 

[P7M13]

Bubba can git-r-done