Looking for Reputable Smith N. of Seattle for barrel threading.

Discussion in 'Maintenance & Gunsmithing' started by osprey, Oct 11, 2017 at 11:25 AM.

Tags:
  1. osprey

    osprey
    Wetstern WA
    Well-Known Member

    Messages:
    304
    Likes Received:
    486
    As the title says I am looking for a good local smith N of Seattle for barrel threading work. Here is the caveat, I have used Benchmark barrels before and they did great work on a single shot 44 mag barrel but this is on a Marlin lever gun. Benchmarks cnc lathes are big and my barrel would have to be removed from the receiver to thread. The gun is very accurate and I would prefer not to disturb this junction. I would prefer to just strip the gun down to just the barrel and gutted reciever and have someone that could chuck it up with the receiver attached. A smaller precision lathe would be capable of doing this. Any recommendations are appreciated.
     
  2. Nosferatu

    Nosferatu
    Monroe, WA
    New Member

    Messages:
    15
    Likes Received:
    9
    osprey likes this.

Share This Page