- Messages
- 3,018
- Reactions
- 10,610
Copied from my CL listing <broken link removed>
More pics are in the link.
Price is $1500
Location is Hillsboro/Aloha
____________________________________________________________________________
140,000 BTU waste oil burning heater. This is currently in my shop, hooked up and working. I bought it from my boss when he upgraded to a new unit at his auto repair shop. I've used it through the last two winters but the truth is, it's just too much for my 30'x36' home shop. It needs to be in a larger or less insulated building. The current version of this sells for over $5K and that doesn't include the tank, plumbing or expensive chimney pipe.
What it requires;
-A 110v outlet to plug it into.
-An air source (shop air / compressor).
-A hole in the roof or wall to pass vent pipe through.
It comes complete with everything else you'll need;
-Lanair HI-140 furnace.
-Upgraded larger (quiet) squirrel cage fan.
-Operator's manual.
-2 cleaned/serviced spare burner assemblies and some misc. small parts.
-18-20' triple wall chimney pipe with cap + some misc piping etc.
-Regulated source air hose.
-200(?) gallon oil tank that's about 2/3 full of mostly ATF.
-Pump/motor with plumbing.
-Basic thermostat and wiring.
If you are a serious buyer, come on by and see and feel it run. Leave me a deposit and give me a couple evenings, preferably a weekend, to get it down and pull the chimney. I want to leave it in place until it's sold.
___________________________________________________________________________
Details not in the ad; I'm primarily looking for cash but might be open to partial interesting trades. Not looking for anything in particular except maybe a farm/trail quad. Let me know what you have. I'll be moving next spring/summer and would rather move the cash than the stuff. Watch for more listings in the coming months. Thanks for looking.
More pics are in the link.
Price is $1500
Location is Hillsboro/Aloha
____________________________________________________________________________
140,000 BTU waste oil burning heater. This is currently in my shop, hooked up and working. I bought it from my boss when he upgraded to a new unit at his auto repair shop. I've used it through the last two winters but the truth is, it's just too much for my 30'x36' home shop. It needs to be in a larger or less insulated building. The current version of this sells for over $5K and that doesn't include the tank, plumbing or expensive chimney pipe.
What it requires;
-A 110v outlet to plug it into.
-An air source (shop air / compressor).
-A hole in the roof or wall to pass vent pipe through.
It comes complete with everything else you'll need;
-Lanair HI-140 furnace.
-Upgraded larger (quiet) squirrel cage fan.
-Operator's manual.
-2 cleaned/serviced spare burner assemblies and some misc. small parts.
-18-20' triple wall chimney pipe with cap + some misc piping etc.
-Regulated source air hose.
-200(?) gallon oil tank that's about 2/3 full of mostly ATF.
-Pump/motor with plumbing.
-Basic thermostat and wiring.
If you are a serious buyer, come on by and see and feel it run. Leave me a deposit and give me a couple evenings, preferably a weekend, to get it down and pull the chimney. I want to leave it in place until it's sold.
___________________________________________________________________________
Details not in the ad; I'm primarily looking for cash but might be open to partial interesting trades. Not looking for anything in particular except maybe a farm/trail quad. Let me know what you have. I'll be moving next spring/summer and would rather move the cash than the stuff. Watch for more listings in the coming months. Thanks for looking.
Last Edited:
