- Messages
- 14,975
- Reactions
- 27,564
Well, not really, but for many years the trigger on my 'old' Bersa 644 .22 had a little 'glitch' that didn't seem normal so last night I dove into it to resolve the problem.
What I found was the hammer/trigger link was slightly bent by a couple thou and was not operating smoothly.
Anyway I took it out and lightly tapped it on a flat, smooth chunk of steel to flatten it, then 'stoned' it on an oilstone to get it completely flat and smooth.
Result? A much smoother, (and lighter) trigger pull. Sometimes all it takes are the 'simplest' things to resolve a problem!
What I found was the hammer/trigger link was slightly bent by a couple thou and was not operating smoothly.
Anyway I took it out and lightly tapped it on a flat, smooth chunk of steel to flatten it, then 'stoned' it on an oilstone to get it completely flat and smooth.
Result? A much smoother, (and lighter) trigger pull. Sometimes all it takes are the 'simplest' things to resolve a problem!
Last Edited: