- Messages
- 645
- Reactions
- 428
- Ad Type
- For Sale
- Price
- $430
- Manufacturer
- Other / Not Listed
- City
- La Center
- State
- Washington
- Zip Code
- 98629
SOLD
Ever want to be able to put a folding stock or brace on your AR and fire it folded? Now you can!
It pains me a bit to let this go, because I was one of the very first to pre-order it, and then waited roughly a year and a half for it to finally be shipped. I installed it in my "unicorn hunter" pistol and cycled it a few times, but never got it out to the range...so it is unfired and exactly how it came to me brand new.
Unfortunately, I've got truck parts I need to buy, and right now that means having to let go of some other stuff.
Lots of information here, and I can also provide the buyer with other information from the MFGR that was sent to me via messages, etc. to aid in tuning it.
www.evolutionweaponsystems.com
Includes two different sets of recoil rod springs, and three sets of rear springs for fine tuning. All the allen keys for installation are included, and this model includes the picatinny rail adapter so you can run any brace or stock that uses the 1913 rail interface. I am also including a Sig buffer tube adapter folding knuckle in the asking price.
Some things to note:
This does not have serrations for a forward assist. You can have one on the upper, but it will not do anything.
This does not have a cut-out for the dust cover to close. You can leave the DC on your upper, but it will not be able to close with the BCG in battery.
The entire recoil assembly is captured within the upper receiver and back-plate that is installed in the buffer-tube hole in your lower. You can fire it without a buffer on the lower at all, or with a folded stock/brace.
TiN coated BCG (was only available on the initial pre-orders), MPI bolt.
The maker is super responsive to questions - I have typically conversed with him via Instagram messages.
PM me if you are interested. I would prefer FTF in Portland area, but would entertain shipping at cost.
A couple of pics from the AR I had it in (AR is not included):
Ever want to be able to put a folding stock or brace on your AR and fire it folded? Now you can!
It pains me a bit to let this go, because I was one of the very first to pre-order it, and then waited roughly a year and a half for it to finally be shipped. I installed it in my "unicorn hunter" pistol and cycled it a few times, but never got it out to the range...so it is unfired and exactly how it came to me brand new.
Unfortunately, I've got truck parts I need to buy, and right now that means having to let go of some other stuff.
Lots of information here, and I can also provide the buyer with other information from the MFGR that was sent to me via messages, etc. to aid in tuning it.
Back-Ordered Buffer-less BCG (.223/5.56) w/ 1913 RAIL Adapt
PRE-ORDER SHIPPING JANUARY 1st 2019 Evolution Weapon Systems Bufferless Bolt Carrier .223/5.56mm (PATENT PENDING) The Revolutionary Bolt Carrier grou
www.evolutionweaponsystems.com
Includes two different sets of recoil rod springs, and three sets of rear springs for fine tuning. All the allen keys for installation are included, and this model includes the picatinny rail adapter so you can run any brace or stock that uses the 1913 rail interface. I am also including a Sig buffer tube adapter folding knuckle in the asking price.
Some things to note:
This does not have serrations for a forward assist. You can have one on the upper, but it will not do anything.
This does not have a cut-out for the dust cover to close. You can leave the DC on your upper, but it will not be able to close with the BCG in battery.
The entire recoil assembly is captured within the upper receiver and back-plate that is installed in the buffer-tube hole in your lower. You can fire it without a buffer on the lower at all, or with a folded stock/brace.
TiN coated BCG (was only available on the initial pre-orders), MPI bolt.
The maker is super responsive to questions - I have typically conversed with him via Instagram messages.
PM me if you are interested. I would prefer FTF in Portland area, but would entertain shipping at cost.
A couple of pics from the AR I had it in (AR is not included):
Last Edited:
