- Messages
- 2,159
- Reactions
- 3,410
I am selling an ALMOST NEW DPMS Sportical NATO 5.56.
The gun has been to the range one time and has had only 20 rounds of a combination of XM193 and Hornady TAP through it. Examining the gun should verify the claim I am making. The gun only has some minor markings from storing, putting on a benchrest and taking on and off optics, nothing that is out of the ordinary for a gun used a few times. The gun has had a trigger job done to improve its performance. The factory DPMS triggers are not too great, but this one has been modified for a much cleaner pull.
The gun includes the factory DPMS black pelican style case, cleaning tools, as well as two unused DPMS 30rd magazines.
Here are the specs of the gun:
Barrel:
•16" Lite Contour w/A2 flash hider (birdcage)
•4140 chrome-moly steel
•6 grooves, right-hand 1x9 twist,
button rifled
Chamber:
•5.56x45mm
Method of Operation:
•Gas operated rotating bolt
Bolt & Carrier:
•8620 steel bolt carrier, heat treated
and plated per Mil Spec
•Phosphated steel bolt, heat treated
and plated per Mil Spec
Weight:
•Empty - 6.3 lbs.
Length:
•Extended: 36 3/8"
•Collapsed: 32 1/2"
Upper Receiver:
•Flattop Lo-Pro, Extruded
•6066-T6 aircraft aluminum alloy
•Hard coat anodized per Mil Spec
•Right hand ejection
Lower Receiver:
•Forged 7075-T6 aircraft aluminum alloy
•Hard coat anodized per Mil Spec
•Semi-Auto trigger group
•Aluminum trigger guard
•Aluminum magazine release button
Stock:
•DPMS Pardus Carbine Stock
Handguards:
•GlacierGuards™.
•Oval Carbine Length
•Aluminum Delta Ring
Asking: $685.00
Terms:
I will do a FTF in WA only and sell for CASH. I am located in Southwest Washington, in Vancouver.
For all other transactions I will only accept a POSTAL Money Order. If you really require to use a Certified Check, then be prepared for long waits and complications; but I may be open to it. If located outside of WA, I can ship to an FFL who will accept a gun from a non-FFL. If your FFL requires the gun be shipped from another FFL, then you will have to pay an additional $20 to receive the gun from my FFL. Buyer must pay all shipping and FFL fees.
I decided that I bought too many guns during the election and now I am in need to get rid of some to increase my cashflow. The gun really is nice and shoots great, but I cannot afford to keep it. My loss, your gain.
The gun has been to the range one time and has had only 20 rounds of a combination of XM193 and Hornady TAP through it. Examining the gun should verify the claim I am making. The gun only has some minor markings from storing, putting on a benchrest and taking on and off optics, nothing that is out of the ordinary for a gun used a few times. The gun has had a trigger job done to improve its performance. The factory DPMS triggers are not too great, but this one has been modified for a much cleaner pull.
The gun includes the factory DPMS black pelican style case, cleaning tools, as well as two unused DPMS 30rd magazines.
Here are the specs of the gun:
Barrel:
•16" Lite Contour w/A2 flash hider (birdcage)
•4140 chrome-moly steel
•6 grooves, right-hand 1x9 twist,
button rifled
Chamber:
•5.56x45mm
Method of Operation:
•Gas operated rotating bolt
Bolt & Carrier:
•8620 steel bolt carrier, heat treated
and plated per Mil Spec
•Phosphated steel bolt, heat treated
and plated per Mil Spec
Weight:
•Empty - 6.3 lbs.
Length:
•Extended: 36 3/8"
•Collapsed: 32 1/2"
Upper Receiver:
•Flattop Lo-Pro, Extruded
•6066-T6 aircraft aluminum alloy
•Hard coat anodized per Mil Spec
•Right hand ejection
Lower Receiver:
•Forged 7075-T6 aircraft aluminum alloy
•Hard coat anodized per Mil Spec
•Semi-Auto trigger group
•Aluminum trigger guard
•Aluminum magazine release button
Stock:
•DPMS Pardus Carbine Stock
Handguards:
•GlacierGuards™.
•Oval Carbine Length
•Aluminum Delta Ring
Asking: $685.00
Terms:
I will do a FTF in WA only and sell for CASH. I am located in Southwest Washington, in Vancouver.
For all other transactions I will only accept a POSTAL Money Order. If you really require to use a Certified Check, then be prepared for long waits and complications; but I may be open to it. If located outside of WA, I can ship to an FFL who will accept a gun from a non-FFL. If your FFL requires the gun be shipped from another FFL, then you will have to pay an additional $20 to receive the gun from my FFL. Buyer must pay all shipping and FFL fees.
I decided that I bought too many guns during the election and now I am in need to get rid of some to increase my cashflow. The gun really is nice and shoots great, but I cannot afford to keep it. My loss, your gain.