Cylinder throat reaming...need GOOD LOCAL gunsmith, quick!

Discussion in 'Business Discussion & Reviews' started by hariph creek, Jun 11, 2014.

  1. hariph creek

    hariph creek
    vancouver, wa.
    Active Member

    Messages:
    543
    Likes Received:
    44
    Long story short version:
    I have two Rugers (SP101 & GP100). Both need the cylinder throats reamed. I figure I'll get the forcing cones chamfered too. I need recommendations, leads, etc... on a good local gunsmith in the greater PDX/Vancouver area. Especially anyone you know who's done this before.
    I've tried a couple that I'm familiar with, they don't do it. I really don't want to ship these, since time is an issue.

    Thanks!
     
  2. Certaindeaf

    Certaindeaf
    SE Portland
    Well-Known Member

    Messages:
    10,199
    Likes Received:
    14,155
  3. hariph creek

    hariph creek
    vancouver, wa.
    Active Member

    Messages:
    543
    Likes Received:
    44
    Thank you, I just started a conversation with him.
     
  4. Joe13

    Joe13
    NW of Vancouver
    Opinionated & Blunt Silver Supporter Bronze Supporter 2015 Volunteer 2016 Volunteer

    Messages:
    8,449
    Likes Received:
    16,709
    I've been recommended to Clark county gun smithing by a friend for some other work.

    I've not had it done but they seem nice and knowledgable.
     
  5. hariph creek

    hariph creek
    vancouver, wa.
    Active Member

    Messages:
    543
    Likes Received:
    44
    Les is a really nice guy. I'm waiting on a call back from him.
     
  6. hariph creek

    hariph creek
    vancouver, wa.
    Active Member

    Messages:
    543
    Likes Received:
    44
    I'd also be interested in borrowing or renting a .358" reamer and pilots. If anyone has or knows of some?
     

Share This Page