- Ad Type
- For Sale
- Manufacturer
- Other / Not Listed
- City
- Oregon City
- State
- Oregon
$20 min purchase to meet up in other words I can't meet up to sell a .50 cent spring so check out my other postings or just ask.
Colt Gas tubes used rifle length $8 each
Colt A1 flat delta rings. These have a purple tint to them $20 each I am almost out
Colt A1 flat delta rings refinished black $18 each (SOLD)
A2 rear sight bases $10 each Please note these will work for A2 upper receivers but they are shorter I believe they are from carry handles and please note a mil-spec Rear Sight Elevation Knob will not work for these due to thread size.
A2 Rear Sight Elevation Knob these are mil-spec so they will not work with the bases above $5 each
A2 AR-15 Rear Sight Windage Knob $5 each (SOLD OUT)
AR-15 Rear Sight Flat Spring $1 each
AR-15 Rear Sight Elevation Knob Spring .50 cents each
A1 rear sight spring $.25 each I have about 100 of them.
A1 rear sight detent $2 each.
5 left colt FSB M16 .625" skinny barrel takes offs. Please note these are Colt M16 take-offs the remaining ones have loose swivels with most of the rubber coating missing. They are "C" Marked and come with a front sight assembly but no taper pins. $30 each
1 F marked and 1 non F marked FSB for .75" Barrel
F marked stripped not sight or taper pins $25
Non-F Marked stipped not sight or taper pins$35
front sight assembly with purchase of FSB $5
Samson low profile .625" gas block $30 shipped
Samson Gas Block for .625" Barrels held on by not 2 but 4 set screws for extra security. $38 shipped or $30 shipped with the rail.
Railed Top Front sight base Steel not aluminimum for .625" barrel $20
A1 flash hider $10 or $12 with the washer.
A1 Triangle Handguard caps $5 each
National Match A2 upper receiver Triple pin A2 rear sight In near excellent condition $200
Colt Gas tubes used rifle length $8 each
Colt A1 flat delta rings. These have a purple tint to them $20 each I am almost out
A2 rear sight bases $10 each Please note these will work for A2 upper receivers but they are shorter I believe they are from carry handles and please note a mil-spec Rear Sight Elevation Knob will not work for these due to thread size.
A2 Rear Sight Elevation Knob these are mil-spec so they will not work with the bases above $5 each
AR-15 Rear Sight Flat Spring $1 each
AR-15 Rear Sight Elevation Knob Spring .50 cents each
A1 rear sight spring $.25 each I have about 100 of them.
A1 rear sight detent $2 each.
5 left colt FSB M16 .625" skinny barrel takes offs. Please note these are Colt M16 take-offs the remaining ones have loose swivels with most of the rubber coating missing. They are "C" Marked and come with a front sight assembly but no taper pins. $30 each
1 F marked and 1 non F marked FSB for .75" Barrel
F marked stripped not sight or taper pins $25
Non-F Marked stipped not sight or taper pins$35
front sight assembly with purchase of FSB $5
Samson low profile .625" gas block $30 shipped
Samson Gas Block for .625" Barrels held on by not 2 but 4 set screws for extra security. $38 shipped or $30 shipped with the rail.
Railed Top Front sight base Steel not aluminimum for .625" barrel $20
A1 flash hider $10 or $12 with the washer.
A1 Triangle Handguard caps $5 each
- I agree to the classified rules and terms of service
Last Edited: