- Ad Type
- For Sale
- Price
- $130
- Manufacturer
- Other / Not Listed
- City
- Tigard
- State
- Oregon
- Zip Code
- 97223
This is a used, but in very good condition item, and includes both the stock and brace options. Currently the stock is installed, but you get the brace with the sale.
I had this on a M92 PAP as a brace for a long time, then had the gun registered as an SBR and replaced the brace with a stock. The swap is fairly easy.
This is the CNC Warrior page for the stock: PAP M85/M92 Tubular Folding Stock
This is a left side folder, and I assume this is the 9 inch version as trunion to butt is just under 10 inches with the stock installed.
With the brace installed it is 9 inches from trunion to butt.
This buttstock/brace and hinge system is installed using a single 5/16-18 bolt (nut and bolt included) thru the back of your trunnion (similar to Mossberg and Remington 870 mounts). It gives you a rock solid mount that will be dependable under the most adverse situations. Small tangs are milled into the hinge base that secure it into the correct rotational and vertical position.
You will probably have to drill a hole in the rear of the trunion for this stock/brace to work.
$130.00 for everything pictured.
FTF at Tigard or Beaverton BiMart parking lot
Will ship to members with good transaction history for an additional $10.
I had this on a M92 PAP as a brace for a long time, then had the gun registered as an SBR and replaced the brace with a stock. The swap is fairly easy.
This is the CNC Warrior page for the stock: PAP M85/M92 Tubular Folding Stock
This is a left side folder, and I assume this is the 9 inch version as trunion to butt is just under 10 inches with the stock installed.
With the brace installed it is 9 inches from trunion to butt.
This buttstock/brace and hinge system is installed using a single 5/16-18 bolt (nut and bolt included) thru the back of your trunnion (similar to Mossberg and Remington 870 mounts). It gives you a rock solid mount that will be dependable under the most adverse situations. Small tangs are milled into the hinge base that secure it into the correct rotational and vertical position.
You will probably have to drill a hole in the rear of the trunion for this stock/brace to work.
$130.00 for everything pictured.
FTF at Tigard or Beaverton BiMart parking lot
Will ship to members with good transaction history for an additional $10.
- I agree to the classified rules and terms of service
Last Edited: