I ran across an NOS Dixie Gun Works barrel that was my dad's (.45 cal., 28-3/4" octagon, percussion, listed as "Made in Italy" and a P/N # 0330). I found nothing on the internet so far for this barrel and Dixie hasn't been too helpful telling me what rifle style this was intended for. I'm guessing Hawken at a minimum. The color seen on the barrel is not rust but is whatever protectant they used. It was then wrapped in some type of soft paper-like material that is stuck on the barrel in a few locations. I made no attempt to remove any of the grease or paper at this point. I also found a complete set of hardware and a separate (extra) hammer assembly listed as for a Hawken.
I'll be posting these soon along with (separately) bullet molds, lead melting pot, a few round balls in various diameters, shooting bag with Misc supplies. Just trying to put final details together now as to what style rifle the barrel is for. If you have any thoughts. please let me know.
I'll be posting these soon along with (separately) bullet molds, lead melting pot, a few round balls in various diameters, shooting bag with Misc supplies. Just trying to put final details together now as to what style rifle the barrel is for. If you have any thoughts. please let me know.
Last Edited: