- Ad Type
- For Sale
- Price
- $450
- Manufacturer
- Other / Not Listed
- City
- Oregon City
- State
- Oregon
Please not this sale is only for the barrel and front sight. The receiver assembly and bolt carrier group and side sling, handguards and delta ring assembly available at extra cost.
ARMS #41 SILHOUETTE™ Front Folding Sight Taper Pinned by TNTE to a Stag ARMS chrome lined 1/9 Twist Barrel. The barrel was original 16" but was cut down to 14.75" crowned and threaded then a Extended flash hider was pinned for 16" Legal min barrel length. Less than 200 rds. fired. I purchased the barrel new only had it out to the range twice.
$450 for just the barrel, barrel nut, and pinned ARMS #41 and flash hider. note that the ARMS 41 cost $230 alone then another $100 in professional installation and shipping that's $330 which means the CROME lined barrel is only costing you $120. I spent over $200 on the barrel buying it new and having it profiled like the 1/7 barrels and pinning and welding the flash hider. This is not one of the lower cost nitride barrels.
If you happen to be left handed and want the complete upper I will let it go for $725 I can also convert it to a Right Handed upper as well I have the tools and have done hundreds of barrel swops.
and that would be for the complete upper with the side sling attachment bolt carrier group MINUS the ARMS 40 rear sight and PRI Big Latch.
Taper pins are the most solid stable gas block option available. No screws to work loose, no block to slide out of place. In the event of optic failure the front sight folds up and works like an A2 FSB. For those who like to use optics but also want M4 rifle profile with bayonet lug. I don't think ARMS offers these with this option anymore as I can't find them on their web site and TNTE is no longer doing the pinning service anymore.
ARMS #41 SILHOUETTE™ Front Folding Sight Taper Pinned by TNTE to a Stag ARMS chrome lined 1/9 Twist Barrel. The barrel was original 16" but was cut down to 14.75" crowned and threaded then a Extended flash hider was pinned for 16" Legal min barrel length. Less than 200 rds. fired. I purchased the barrel new only had it out to the range twice.
$450 for just the barrel, barrel nut, and pinned ARMS #41 and flash hider. note that the ARMS 41 cost $230 alone then another $100 in professional installation and shipping that's $330 which means the CROME lined barrel is only costing you $120. I spent over $200 on the barrel buying it new and having it profiled like the 1/7 barrels and pinning and welding the flash hider. This is not one of the lower cost nitride barrels.
If you happen to be left handed and want the complete upper I will let it go for $725 I can also convert it to a Right Handed upper as well I have the tools and have done hundreds of barrel swops.
and that would be for the complete upper with the side sling attachment bolt carrier group MINUS the ARMS 40 rear sight and PRI Big Latch.
Taper pins are the most solid stable gas block option available. No screws to work loose, no block to slide out of place. In the event of optic failure the front sight folds up and works like an A2 FSB. For those who like to use optics but also want M4 rifle profile with bayonet lug. I don't think ARMS offers these with this option anymore as I can't find them on their web site and TNTE is no longer doing the pinning service anymore.
Last Edited:
