- Messages
- 36
- Reactions
- 13
I have two Remington 700 barrels for sale. First is a 260 Remington barrel that was manufactured by AAC/ Remington. The barrel is nitride finished on the exterior and bore and is 24 inches long with 5/8-24 threads. This barrel is new and has never been mounted or used at all. This barrel is fully finished/chambered and is headspaced off of the recoil lug thickness. Directions from AAC will be included. From what I have found on these barrels they are good shooters with many rifles shooting 1/2 MOA or better. The profile is listed as a medium contour but is is definitely on the heavier side with a good taper. $300 OBO for this barrel.
Second barrel is a Remington 700 "Tactical" take-off barrel in 308 Win. This barrel has been shortened to 16.5 inches and threaded 5/8-24 by Tom Denall - T.D. Manufacturing LLC in Bend. The round count is unknown but the throat and rifling looks sharp. There is a small amount of speckled rust spots below the stock line near the action threads. Comes with a plastic thread cap. $125 OBO
I would prefer a FTF but would be willing to ship for $20.
Thanks for looking!
Second barrel is a Remington 700 "Tactical" take-off barrel in 308 Win. This barrel has been shortened to 16.5 inches and threaded 5/8-24 by Tom Denall - T.D. Manufacturing LLC in Bend. The round count is unknown but the throat and rifling looks sharp. There is a small amount of speckled rust spots below the stock line near the action threads. Comes with a plastic thread cap. $125 OBO
I would prefer a FTF but would be willing to ship for $20.
Thanks for looking!