Built this rifle for a Nightime Hog Hunting trip in TX with my Dad. The trip is over, letting this move on for another build. I yanked my matched upper/lower receiver off and put on CMMG upper, stripped 80% lower. Note, I have tested the 6.5 Grendel round in standard AR15 5.56 magazines and it works. I sighted the rifle in @ 100 yds. I am a bubblegumty shot but managed 1.25MOA @ 100yds. Zeroing the scope was EASY since you can enter your ballistic coefficients (multiple calibers) into the scope and it will adjust for you. The farthest I shot was around 150 yards with lethality. I cannot answer what the MOA was farther than that because it was beyond what I was using the rifle for.
Rifle:
-16" BCA Stainless 6.5 Grendel TYPE 2 Barrel (EXACTLY 40 rounds target/hunting)
-BCA 6.5 Type 2 Bolt and Carrier (standard 5.56 carrier if you're wondering)
-15" KeyMod Free-Float Lightweight Rail
-Scope Mount Riser
-YHM Low Pro Gas Block w/Gas Tube
-Linear Comp (toned down the sound a lot, ported it forward)
-CMMG Stripped Upper
-80% Arms Stripped Lower receiver Fire/Safe marked, NOT FINISHED!
-Ergo Grips Palm Shelf Ergo Grip
-Buffer Tube, Buffer, Spring, Adjustable Stock
-(2) 6.5 Grendel Magazines.
-(80) rounds of Hornady BLACK ELD Match 123gr -
Optic:
-ATN X-Sight 2HD 5-20x , WiFi, GPS, Recording, built-in range finder application
-IR illuminator (pretty decent out to ~200 yds)
-External battery, battery holder that affixes to stock. (Scope can run on 4 AA batteries for about 2 hours. This external battery allows ~20 hours of continuous use
-Cases for lens extension, IR illuminator, and Scope
-Class 10 SD Card for recording your kills!
You'll need:
UPK, LPK, CH, and finish milling the 80% receiver to make this a working firearm
Looking for $1050 OBO for the whole package. Heck, the Ammo alone is worth $100. Will consider separating optic for $550 OBO.
Let's make a deal!
Trades possible:
AR Stuff in 5.56/.223 Wylde (no old school A2 stuff please)
Vortex AR scopes
.45/70 SBR, prefer stainless. Does not need to be Jm stamped)
Ruger 10/22
Auto Shotgun suitable for 3-gun
Bolt Action Rifle, something that can take down an elk
Damn, really pitch me almost anything, Trading is fun!
Thanks for looking! PM or Text with questions.
-DrCox
503-560-1926
Rifle:
-16" BCA Stainless 6.5 Grendel TYPE 2 Barrel (EXACTLY 40 rounds target/hunting)
-BCA 6.5 Type 2 Bolt and Carrier (standard 5.56 carrier if you're wondering)
-15" KeyMod Free-Float Lightweight Rail
-Scope Mount Riser
-YHM Low Pro Gas Block w/Gas Tube
-Linear Comp (toned down the sound a lot, ported it forward)
-CMMG Stripped Upper
-80% Arms Stripped Lower receiver Fire/Safe marked, NOT FINISHED!
-Ergo Grips Palm Shelf Ergo Grip
-Buffer Tube, Buffer, Spring, Adjustable Stock
-(2) 6.5 Grendel Magazines.
-(80) rounds of Hornady BLACK ELD Match 123gr -
Optic:
-ATN X-Sight 2HD 5-20x , WiFi, GPS, Recording, built-in range finder application
-IR illuminator (pretty decent out to ~200 yds)
-External battery, battery holder that affixes to stock. (Scope can run on 4 AA batteries for about 2 hours. This external battery allows ~20 hours of continuous use
-Cases for lens extension, IR illuminator, and Scope
-Class 10 SD Card for recording your kills!
You'll need:
UPK, LPK, CH, and finish milling the 80% receiver to make this a working firearm
Looking for $1050 OBO for the whole package. Heck, the Ammo alone is worth $100. Will consider separating optic for $550 OBO.
Let's make a deal!
Trades possible:
AR Stuff in 5.56/.223 Wylde (no old school A2 stuff please)
Vortex AR scopes
.45/70 SBR, prefer stainless. Does not need to be Jm stamped)
Ruger 10/22
Auto Shotgun suitable for 3-gun
Bolt Action Rifle, something that can take down an elk
Damn, really pitch me almost anything, Trading is fun!
Thanks for looking! PM or Text with questions.
-DrCox
503-560-1926