- Messages
- 271
- Reactions
- 54
1st gen Strider SMF full size s30v folder.
With rare BOS heat treating
This has been used and abused, I am the second owner. It was in rough shape when I got it. The previous owner decided the jimping on the Ti side was too "aggressive" and watered it down. I went ahead and had my guy put some aggressive back in it, but made the radius a little larger than normal.
The blade was worn with chips and a broken tip. Because of the tip and the re profiling of the blade, the oal is shorter. I had a swedge added and finished in a good looking black stone wash. It is also hair-popping sharp!
The g10 has usage marks, nothing terrible, the Ti side was re tiger striped as well. The blade also doesn't center when closed. The knifemaker tried but couldn't get it there.
I think that about sums up the history and details of this piece. It's beautiful after this makeover and has a lot of personality.
I'm looking for $old firm
I will entertain offers and trades as well
Things I'm looking for:
Beretta 71 w/threaded barrel
Ruger charger pistol
5.56 pistol upper or parts BCG, barrel, rail etc.
9mm PCC upper or upper parts
Eotech xps-2
Trij MRO
Trij RMR
Aimpoint micro t1,t2
A good scope for .308
SBPDW brace
SBA3 brace
A good 3.5-4lbs contained ar trigger
P80 gen 2 g26, g19, g17
Micro Roni brace version
Maybe a lightweight, hammerless snub nose..
RMJ tactical hawk or similar
Don't need more steel but if you have a Sibert, either a pocket rocket or a custom fixed.
Truck stuff, I have a 2nd gen Tacoma and I still need a light bar, spacers, a hi-lift jack.
I'm in the middle of a few ar builds so I always need parts. I want to put together a p80 glock so barrels or tall, suppressor night sights or something. This should give you a good idea of what I'm looking for. Shoot me a pm, worst I can say is "no thanks"
With rare BOS heat treating
This has been used and abused, I am the second owner. It was in rough shape when I got it. The previous owner decided the jimping on the Ti side was too "aggressive" and watered it down. I went ahead and had my guy put some aggressive back in it, but made the radius a little larger than normal.
The blade was worn with chips and a broken tip. Because of the tip and the re profiling of the blade, the oal is shorter. I had a swedge added and finished in a good looking black stone wash. It is also hair-popping sharp!
The g10 has usage marks, nothing terrible, the Ti side was re tiger striped as well. The blade also doesn't center when closed. The knifemaker tried but couldn't get it there.
I think that about sums up the history and details of this piece. It's beautiful after this makeover and has a lot of personality.
I'm looking for $old firm
I will entertain offers and trades as well
Things I'm looking for:
Beretta 71 w/threaded barrel
Ruger charger pistol
5.56 pistol upper or parts BCG, barrel, rail etc.
9mm PCC upper or upper parts
Eotech xps-2
Trij MRO
Trij RMR
Aimpoint micro t1,t2
A good scope for .308
SBPDW brace
SBA3 brace
A good 3.5-4lbs contained ar trigger
P80 gen 2 g26, g19, g17
Micro Roni brace version
Maybe a lightweight, hammerless snub nose..
RMJ tactical hawk or similar
Don't need more steel but if you have a Sibert, either a pocket rocket or a custom fixed.
Truck stuff, I have a 2nd gen Tacoma and I still need a light bar, spacers, a hi-lift jack.
I'm in the middle of a few ar builds so I always need parts. I want to put together a p80 glock so barrels or tall, suppressor night sights or something. This should give you a good idea of what I'm looking for. Shoot me a pm, worst I can say is "no thanks"
Last Edited:
