- Ad Type
- For Sale
- Price
- $475
- Manufacturer
- Other / Not Listed
- City
- Tualatin
- State
- Oregon
- Zip Code
- 97062
Getting away from short barrel AR's so this is for sale. Many parts are new, specs as follows.
- Anderson lightweight upper receiver, slick side. No forward assist or dust cover. (New)
- Toolcraft full auto rated nickel boron BCG (roughly 500 rounds)
- Strike Industries charging handle (New)
- Aero Precision low profile gas block and carbine length gas tube (New)
- Ballistic Advantage 10.5" Government Profile, Modern Series barrel. 1:7 twist, 5.56 (New)
- Kaw Valley Precision 3.25" magnum linear compensator (500 rounds)
- Aero Atlas S-One 12" M-Lok handguard (used for a couple months, like new)
Gas block set screw that is inline with the gas port has been dimpled with the SLR dimple jig. If you remove or replace the gas block, they will go right back to the correct location with the dimple. Barrel to receiver connection lightly coated with Aeroshell, barrel nut threads and muzzle device threads lightly coated with Aeroshell. Proper torque on each, and light Rockset on gas block set screws. Assembled and function tested it with 10 rounds. Last photo is to visualize the completed pistol only.
Asking $475
- Anderson lightweight upper receiver, slick side. No forward assist or dust cover. (New)
- Toolcraft full auto rated nickel boron BCG (roughly 500 rounds)
- Strike Industries charging handle (New)
- Aero Precision low profile gas block and carbine length gas tube (New)
- Ballistic Advantage 10.5" Government Profile, Modern Series barrel. 1:7 twist, 5.56 (New)
- Kaw Valley Precision 3.25" magnum linear compensator (500 rounds)
- Aero Atlas S-One 12" M-Lok handguard (used for a couple months, like new)
Gas block set screw that is inline with the gas port has been dimpled with the SLR dimple jig. If you remove or replace the gas block, they will go right back to the correct location with the dimple. Barrel to receiver connection lightly coated with Aeroshell, barrel nut threads and muzzle device threads lightly coated with Aeroshell. Proper torque on each, and light Rockset on gas block set screws. Assembled and function tested it with 10 rounds. Last photo is to visualize the completed pistol only.
Asking $475
- I agree to the classified rules and terms of service
Last Edited: