- Messages
- 297
- Reactions
- 281
- Ad Type
- For Sale
- Price
- $120
- Manufacturer
- Troy
- City
- twin falls
- State
- Idaho
- Zip Code
- 83301
This is a used Troy Tomahawk PDW w/ the short buffer and spring. (older version before the BCG model)
Has QD point on the rear
It is in very good condition.
Only mod was I filed a notch in the threaded end of the tube to get an extra turn on it to time out tight.
Not needing trades, price is shipped to those allowed.
Payment in MO or PP F&F
I don't do Zelle or Venmo
Local P/U is possible
Post here then follow up w/ IM
thanks
Followup on the use for those not sure
The buffer is milled down to slide in the BCG.
There are 2 buttons on the underside of the stock, the forward is the adjustment the rear is pushed in when you pull back on the CH that will lock the buffer back, then w/ the port open push the BCG forward to separate the upper from the lower
With practice like most things it is quick
Has QD point on the rear
It is in very good condition.
Only mod was I filed a notch in the threaded end of the tube to get an extra turn on it to time out tight.
Not needing trades, price is shipped to those allowed.
Payment in MO or PP F&F
I don't do Zelle or Venmo
Local P/U is possible
Post here then follow up w/ IM
thanks
Followup on the use for those not sure
The buffer is milled down to slide in the BCG.
There are 2 buttons on the underside of the stock, the forward is the adjustment the rear is pushed in when you pull back on the CH that will lock the buffer back, then w/ the port open push the BCG forward to separate the upper from the lower
With practice like most things it is quick
