- Messages
- 271
- Reactions
- 54
Item(s):
MSA Gallet TC 2000 Kevlar Helmet Size Medium with NVG Mounting Plate and Bracket. Oregon Aero Ballistic Liner Pads and MSA Reversible Helmet Cover.
Condition:
Used, served in Iraq, Liner pads have been gently washed but still needs some cleaning done. There are some light nicks on the top from when it was thrown on the ground, and a few little stains on the helmet cover, other than that It is still in good shape. I am missing the hardware to attach the NVG mount but that can be sourced easily at any hardware store.
Description:
Features:
ACH - TC 2000 Series
Components
-Ballistic-resistant Kevlar® shell
-Four-point adjustable chinstrap retention system
-Seven-pad adjustable suspension system.
Ballistic Resistance
-9mm, 124 grain, FMJ @ 1450 fps, backface < 12 mm
Fragmentation Resistance
-2 grain RCC @ 4075 fps
-4 grain RCC @ 3450 fps
-16 grain RCC @ 2425 fps
-64 grain RCC @ 1700 fps
-17 grain FSP @ 2150 fps
Other Features / Performance
-Minimum static load test of 150 lbs.
-Minimum dynamic load test of 25 fps
-Impact mitigation, less than 150 gs force transmitted to the head at 10 fps
-Compatible with the use of all major gas masks worn under the helmet
-Weights: Medium, 3.0 lbs., Large 3.25 lbs., XL 3.4 lbs.
-Berry Amendment Compliant
-No degradation of performance after 3 immersion in salt water for 3 hours
-Ballistic performance within the following temperature range: 40˚F to 160˚F
-Standard helmet fits over MSA MICH Communication Systems
Payment:
I accept Paypal, or credit card processing through Square
I live in Beaverton, I can meet up in and around the Portland Area, I can also arrange shipping if your further away or in Washington.
I am asking $150 for everything, The night vision bracket alone goes for around $200 by itself.
I would also be interested in trading for:
9mm .147 gr
5.56 federal preferred
17rd Glock mags (Factory)
33rd Glock mags (Factory)
MSA Gallet TC 2000 Kevlar Helmet Size Medium with NVG Mounting Plate and Bracket. Oregon Aero Ballistic Liner Pads and MSA Reversible Helmet Cover.
Condition:
Used, served in Iraq, Liner pads have been gently washed but still needs some cleaning done. There are some light nicks on the top from when it was thrown on the ground, and a few little stains on the helmet cover, other than that It is still in good shape. I am missing the hardware to attach the NVG mount but that can be sourced easily at any hardware store.
Description:
Features:
ACH - TC 2000 Series
Components
-Ballistic-resistant Kevlar® shell
-Four-point adjustable chinstrap retention system
-Seven-pad adjustable suspension system.
Ballistic Resistance
-9mm, 124 grain, FMJ @ 1450 fps, backface < 12 mm
Fragmentation Resistance
-2 grain RCC @ 4075 fps
-4 grain RCC @ 3450 fps
-16 grain RCC @ 2425 fps
-64 grain RCC @ 1700 fps
-17 grain FSP @ 2150 fps
Other Features / Performance
-Minimum static load test of 150 lbs.
-Minimum dynamic load test of 25 fps
-Impact mitigation, less than 150 gs force transmitted to the head at 10 fps
-Compatible with the use of all major gas masks worn under the helmet
-Weights: Medium, 3.0 lbs., Large 3.25 lbs., XL 3.4 lbs.
-Berry Amendment Compliant
-No degradation of performance after 3 immersion in salt water for 3 hours
-Ballistic performance within the following temperature range: 40˚F to 160˚F
-Standard helmet fits over MSA MICH Communication Systems
Payment:
I accept Paypal, or credit card processing through Square
I live in Beaverton, I can meet up in and around the Portland Area, I can also arrange shipping if your further away or in Washington.
I am asking $150 for everything, The night vision bracket alone goes for around $200 by itself.
I would also be interested in trading for:
9mm .147 gr
5.56 federal preferred
17rd Glock mags (Factory)
33rd Glock mags (Factory)
Last Edited: