1. Sign up now and join over 35,000 northwest gun owners. It's quick, easy, and 100% free!
  2. We're giving away over $850 in prizes this month -- enter now for your chance to win!
    Dismiss Notice

thermal acr wire feed welder

Discussion in 'Non-Firearm Item Classifieds' started by trainwreck, Nov 17, 2009.

  1. trainwreck

    trainwreck salem Member

    Likes Received:
    this welder is in very very good shape and only has been used a few times. still have the orignal wire in it. paid 1,700 with the gas bottle and extra tips. will sell for 1,000 obo

    here is the specs on the welder
    The fabricator 210 is a 208 - 230 volt integrated Mig machine
    with a leading performance or 250 amps max output 30% duty
    cycle, 16 voltage steps, spool gun ready and spot stitch timers.
    Supplied with a wheel kit, cylinder rack, regulator, comprehensive
    setup chart and quality Tweco Weldskill gun. The Fabricator 210
    is extremely versatile with an optimized low end performance for
    .023" down to 20 amps and a top end of 250 amps to comfortably
    run .045" wire. It is perfect for sheetmetal, training schools and
    light fabrication up to 1/2" plate.
    Additional Features
    Spool gun compatible
    Easy spool gun fit-up, with no tools required
    Spot, Stitch and dwell timers
    Storage box for consumables, drive rolls, etc.
    10 ft. lead cord length
    CSA listed
    5/2/1 warranty
    Input voltage - 208 - 230v
    Input current - 68/62 amps
    Max output - 300 amp
    Duty Cycle - 40% @ 300 amp at 31.7v
    Current range - 20 -300 amps
    Voltage settings - 24
    max thickness - 5/8"
    Wire - .035" / .045"
    Dimensions - 32" x 27.2" x 36.8"
    Weight - 227 lbs.

    thanks for looking

  2. trainwreck

    trainwreck salem Member

    Likes Received:
Thread Status:
Not open for further replies.